Quote:
Originally Posted by dhfinc
Can anyone tell me if they have had any experience with any suitable replacement stop/turn/tail LED light on a 2009 Montana. That particular model has the 70's Chevy pickup type of tail light assembly that wraps around the corner.
Thanks!
|
In the Modifications and Upgrades section, there is a "sticky" at the very of the thread list entitled: LED Replacement Lights
http://www.keystonerv.org/forums/showthread.php?t=2121 I suggest you read it over carefully.
There is another thread on LED's where I posted a fairly long and detailed informational note about LED's and brightness. You will find that useful, I think. Short version is that whatever LED you select, it has to be 402 lumens on the stop/turn function to equal the brightness of an incandescent S/T/T bulb.
I suspect your fixtures will use the 1156/1157 type bulbs. Just make sure you pick ones that are bright enough and that are shaped to fill the fixture with light properly.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520)
GMRS: WQPG808 (462.675 TPL 141.3)