Manual Slide 3220BH

[pta19713]

I have watched the videos, understand the wiring, how to adjust and the special flex tool needed to manually override the slide outs, as they will not function at the switch. We just purchased and setting it up at a campground for the season, so I will have time to trouble shoot later. For now, how am I supposed to reach the motor on top of the slides in order to manually extend the slides?

[pta19713]

Wanted to note, it is an Accu-slide system. Seems simple enough if my arms were 6' long.

[chuckster57]

Welcome to the forum

The top facia can be removed. Top layer should be brad nailed in place and the board under that will be screwed to the slide room frame with Phillips head screws.

Make note of the position of the top pieces for the assembly.

[dutchmensport]

Remove the header board from inside the camper. It's just loosely stapled. It will pull right off. Um ... there are no "Philips" headed screws anywhere on a Keystone Camper. They use "Robertson" headed screws. That's the square hole in the screw head.

[chuckster57]

Brain fart. Just removed a bedroom slide from a 2021 Voltage, and my Phillips took all the screws out.

And not ALL top layers are brad nailed. Last month took a Montana HC kitchen slide out and all the top layers were siliconed in place.