Rear Slide Bed Light Connector

[Northbysomewhatcrazy]

I have a 2007 Freedom Light 185QB with a manual rear slide. It appears that the rear overbed light gets power from a plug in wire which someone prior to me didn't remove before closing the slide, so all I have left is a wire and a receptacle for it. The receptacle is just aft of the sofa on the rear wall, and the remaining wire was actually semi tucked up into the slide (but clearly is designed to connect to there, if it had the part on the end of the wire). It's a fairly straightforward two wire connector, but I don't know what the part would be called, or where to find one to rewire it. Does anyone know what this part name would be, and ideally a source for it?



Thanks

[chuckster57]

Welcome to the forum

You could simply replace both sides, with a 12V socket and plug.

https://www.amazon.com/Cigarette-Mot...1544140&sr=8-5

https://www.amazon.com/Pack-Fused-Re...1544198&sr=8-4

[Northbysomewhatcrazy]

I have actually been considering doing just that, but figured I'd see if I could track down the existing piece to keep it to a simple wire it in job. It's a good suggestion, thanks!

[chuckster57]

I may have found what your looking for:

https://www.trekwood.com/parts-searc...23+%2F+Keyword

Both sides on this page.

[JRTJH]

I think this may be what you're looking for: https://www.trekwood.com/products/77...-IND-MAR-37247 BUT at that price, I think I'd do some more looking before committing to wanting an OEM replacement !!!!!

The part # is IND-MAR 37247

You may find it some place other than Trekwood.....