Quote:
Originally Posted by Lnhjones
We are in a new avalanche 390ds and the master bedroom slide slid out about 5 inches and won’t go any farther and won’t come all the way back in either. Any ideas why? Last time we were on it, about a month ago everything worked like a dream.
|
I believe the new Aves have a schwintek slide in the bedroom. If that’s the case, you have to disengage the motor and push the slide in by hand and then reset the motors. They get out of sync and jam. With the schwintek system, always try to take the slide all the way out/in without stopping and then hold the switch for a couple seconds after it’s done moving to reset the motors. BTW, the motors are in the wall, you will probably have to remove some trim to find the bolt to disengage them. Once they’re jammed, that’s the only way I know of to correct it. I’m just glad I don’t have that system.