|
05-06-2018, 12:11 PM
|
#1
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Sewer lines question
Well i have the cougar 29BHS and there are 2 sewer line hook ups. I was wondering how do i get the hoses to be able to connect to one "T" section so i can have both lines to drain into the sewer? Seems like the ends of the lines will not connect to the final "T" at the sewer (female/male ends). Can the end of the hoses be changed out? Any suggestions would be appreciated.
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
05-06-2018, 01:13 PM
|
#2
|
Senior Member
Join Date: Mar 2013
Location: Sequim
Posts: 261
|
__________________
2016 Montana 3720RL
2015 Chevy Silverado 3500 HD Duromax :
previous
2012 Montana High Country 313RE
2012 Chevy Silverado 2500 HD Duromax
2010 Palimino Bronco
2005 Chevy Silverado CC 1500
|
|
|
05-06-2018, 01:56 PM
|
#3
|
Junior Member
Join Date: Jul 2017
Location: Sierra Vista
Posts: 29
|
Quote:
Originally Posted by Dhuhn
|
X2
We have this connector and it works well.
|
|
|
05-06-2018, 02:07 PM
|
#4
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Quote:
Originally Posted by Dhuhn
|
I have that but the end of my sewer hose wont connect. Its made to be in the ground. Can you change the end?
|
|
|
05-06-2018, 04:21 PM
|
#5
|
Senior Member
Join Date: Mar 2013
Location: Sequim
Posts: 261
|
Most ends of your sewer hose should disconnect from the elbow that goes in sewer drain they just twist,unless yours is permanently fastened to your hose.
__________________
2016 Montana 3720RL
2015 Chevy Silverado 3500 HD Duromax :
previous
2012 Montana High Country 313RE
2012 Chevy Silverado 2500 HD Duromax
2010 Palimino Bronco
2005 Chevy Silverado CC 1500
|
|
|
05-06-2018, 04:27 PM
|
#6
|
Senior Member
Join Date: Mar 2013
Location: Sequim
Posts: 261
|
https://www.amazon.com/Camco-39543-T...hose+y+fitting
If it is permanently mounted you can cut hose and use these on end, or get new hoses.
__________________
2016 Montana 3720RL
2015 Chevy Silverado 3500 HD Duromax :
previous
2012 Montana High Country 313RE
2012 Chevy Silverado 2500 HD Duromax
2010 Palimino Bronco
2005 Chevy Silverado CC 1500
|
|
|
05-06-2018, 05:58 PM
|
#7
|
Junior Member
Join Date: Apr 2018
Location: Kelowna
Posts: 24
|
Quote:
Originally Posted by Easton091
I have that but the end of my sewer hose wont connect. Its made to be in the ground. Can you change the end?
|
I bought 2 10 ft extensions that go into my y connector. That goes into my 15ft sewer hose. I also have the 2 separate connections.
__________________
2018 Keystone Hideout 28BHSWE
2013 Dodge Ram 2500 CTD
|
|
|
05-07-2018, 08:49 AM
|
#9
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
The Y connector is not designed to hook directly to the campground sewer connection, a 3rd piece of hose is necessary to go from the Y to the sewer. You'll have to have 3 hoses, the Y, & an elbow to connect to the sewer connection. Possibly the rubber donut for the elbow, most all parks/campgrounds require a solid connection to the sewer & if it's not threaded you'll need the donut, your neighbors will also appreciate it.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
05-07-2018, 08:55 AM
|
#10
|
Senior Member
Join Date: Mar 2013
Location: Sequim
Posts: 261
|
You have to disconnect the end that goes in the sewer from your hose,it twist off from where the black hose connects to orange part, then black hose will connect to your y
__________________
2016 Montana 3720RL
2015 Chevy Silverado 3500 HD Duromax :
previous
2012 Montana High Country 313RE
2012 Chevy Silverado 2500 HD Duromax
2010 Palimino Bronco
2005 Chevy Silverado CC 1500
|
|
|
05-07-2018, 09:45 AM
|
#11
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Quote:
Originally Posted by travelin texans
The Y connector is not designed to hook directly to the campground sewer connection, a 3rd piece of hose is necessary to go from the Y to the sewer. You'll have to have 3 hoses, the Y, & an elbow to connect to the sewer connection. Possibly the rubber donut for the elbow, most all parks/campgrounds require a solid connection to the sewer & if it's not threaded you'll need the donut, your neighbors will also appreciate it.
|
HA! Yes i have the last piece also that goes into the ground after the "Y".
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
05-17-2018, 04:51 PM
|
#12
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Here is my dimema. Cannot get my sewer hose to connect to the Y connection. Is there a adapter end i need to buy?
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
05-17-2018, 04:53 PM
|
#13
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
The left connection on the hose hooks to the rv. The other end goes into the ground but wanna instead connect to the Y section then go into the ground
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
05-17-2018, 05:10 PM
|
#14
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
If I understand what you're asking, you are trying to connect the sewer hose "barb connector" to the "Y fitting" which is also a "barb connector". You need "the other end adapter"....
You could "RUBE GOLDBERG" it and use one of these in the first photo: Or you could use one of the Thetford adapters like the second photo. They are "pricey" to be sure, and you can likely find them for less than half the asking price on Amazon at this link: https://www.amazon.com/Thetford-4054...r+hose+adapter
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
05-18-2018, 04:26 AM
|
#15
|
Senior Member
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 2,117
|
Quote:
Originally Posted by Easton091
Here is my dimema. Cannot get my sewer hose to connect to the Y connection. Is there a adapter end i need to buy?
|
Why not purchase two 5' or 10' sewer hoses to connect the trailer ports to the "Y" and then connect your standard hose from the "Y" to the sewer?
Or...hook your standard hose to one port - dump and rinse - then move your standard hose to the other port and repeat?
__________________
Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
|
|
|
05-18-2018, 06:56 AM
|
#16
|
Senior Member
Join Date: Apr 2017
Location: Winnipeg, MB
Posts: 329
|
Sorry could not resist.
[emoji16]
__________________
____________
John & Ekeen
2009 Ford F-150 5.4
2015 Nissan Armada 5.6
2021 Keystone Residence 40FLFT
|
|
|
05-18-2018, 07:48 AM
|
#17
|
Junior Member
Join Date: Apr 2018
Location: Kelowna
Posts: 24
|
Hahaha. We watched this movie the night before I did my first tank dumps. This scene had me triple checking all of my connections. Lol
Quote:
Originally Posted by Carrottop
|
__________________
2018 Keystone Hideout 28BHSWE
2013 Dodge Ram 2500 CTD
|
|
|
05-18-2018, 09:14 AM
|
#18
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Great movie
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
05-18-2018, 09:54 AM
|
#19
|
Junior Member
Join Date: Mar 2018
Location: Sterling Heights
Posts: 26
|
Found my solution...
__________________
2018 Keystone Cougar Half Ton 29 BHS
2018 Chevy Silverado z71 5.3L
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|