Ran 220v into RV :o. Waterpump control panel won't work.
Trying to run my AC off of a generator and hit the 220V switch. I think I was pretty lucky. Nearly everything seems to be working.
My power inverter is working, microwave, TV, AC, and furnace all seem to be functioning normally.
Things that are no longer working are the fuseboard light indicators. The fuses all seem to have survived though, but when the fuses are removed the red light to the right of the fuse, the light that indicates that the fuse is blown or removed, no longer comes on.
The fan under the hood on the stove no longer works.
The temperature slide on the thermostat is no longer functional. The switches on the thermostat still work so I can turn the AC on or off or put it on fan. I haven't checked if the heater works.
I am confident I can fix both of these.
The thing I am having the hardest time with is the waterpump / heater control switches. There appears to be no power to those now. I used a volt meter and it doesn't appear to be getting any power to the control box with the switches.
The water pump itself is great. I ran 12v from the battery to the pump and it works great. I would like to restore the power to the switch panel though.
I don't have a schematic for the power though so I am not sure how to proceed.
Any suggestions from the forum would be much appreciated.
Thanks!
|