Air Pressure Monitoring of Bagged Pin Box
Originally I was going to mount a T and a pressure gage like someone else on another forum had done. The sensor seemed like less work. A pass through sensor may have been better but I was concerned with it sticking out too much.
BTW: the 5th Airborne mounted in the same location ( the highest Ivan) lowered the nose of my FW by about 1/2” inch compared to the OEM Lippert 1621 pin box. It is the only one with an air bag that I found that did not raise the nose.
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|