|
|
05-02-2013, 05:37 AM
|
#1
|
Junior Member
Join Date: Apr 2013
Posts: 7
|
Scissors Jack request
Picking up new TT in a week with a follow on trip, Premier 31bhpr, does anyone know the socket size needed for the 4 scissor jack stands, I have a cordless drill and am packing the essentials for the trip. Thanks in advance
__________________
SaintHalo65
2013 Premier 31BHPR
|
|
|
05-02-2013, 05:41 AM
|
#2
|
Senior Member
Join Date: Apr 2013
Location: Columbia, Missouri
Posts: 197
|
I believe you may find that the directions may say to not use a drill or impact wrench on those jacks. I will check mine later but there is a tag on each jack that has warnings.
|
|
|
05-02-2013, 06:00 AM
|
#3
|
Senior Member
Join Date: Jun 2011
Location: Sulphur, La
Posts: 346
|
Mine requires a 3/4" socket
__________________
Michol02
2012 Cougar 32SAB
2013 Chevy 2500 HD
Visit Mods album in my profile
|
|
|
05-02-2013, 06:07 AM
|
#4
|
Junior Member
Join Date: Apr 2013
Posts: 7
|
I will wait and see then thank you very much
__________________
SaintHalo65
2013 Premier 31BHPR
|
|
|
05-02-2013, 06:37 AM
|
#5
|
Senior Member
Join Date: Apr 2013
Location: Columbia, Missouri
Posts: 197
|
Keep in mind that this is on a 2006 Sunline.
|
|
|
05-02-2013, 07:00 AM
|
#6
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
05-02-2013, 07:04 AM
|
#7
|
Senior Member
Join Date: May 2012
Location: North Florida
Posts: 1,241
|
I use a 3/4" and my Dewalt 18v drill. There is a big difference between a battery powered drill and an impact wrench. You should never attempt to lift the trailer with a stabilizer jack.
__________________
2006 Keystone Hornet 29RLS (The Cracker Cabana)
2009 F-250 SuperDuty CC 6.8L/4.10 (The Black Pearl)
|
|
|
05-02-2013, 12:09 PM
|
#8
|
Senior Member
Join Date: Nov 2012
Location: S.E. Michigan
Posts: 241
|
Use poor folks who don't have electric jacks use a electric drill. Boy I'm getting electric jacks on our new Cougar.
I like to camp not sweat!!!
|
|
|
05-02-2013, 02:23 PM
|
#9
|
Senior Member
Join Date: Apr 2011
Location: Round Rock, Texas, USA
Posts: 102
|
3/4" here.
Pat
|
|
|
05-02-2013, 02:41 PM
|
#10
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
And then there are really poor folks like us who don't have a spare 18V drill to raise and lower the manual jacks. I always thought that manual jacks were exactly that....you had to do it manually.
Sweat? It takes less than 30 secs to either raise or lower 2 jacks by hand and less than 20 to do it with a drill.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
05-02-2013, 04:10 PM
|
#11
|
Senior Member
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
|
I don't use a spare 18V drill. I bought a Ryobi or some other cheaper brand 9V. It's good for a couple rounds of camping before recharging.
Festus, it takes me about five times as long manually as with the drill. Totally worth the money. Especially down south where it's warmer.
__________________
-Scott, DW, DG, DB, and DD
2011 Passport 2590BH
2009 Ford F150 SuperCrew F X4 5.4L w/Max Tow
|
|
|
05-02-2013, 04:56 PM
|
#12
|
Site Team
Join Date: Mar 2009
Location: Fraser Valley BC Canada
Posts: 7,015
|
Scott -
Having never worked in your southern heat, I'm sure it must be very taxing on one's stamina. If I ever get down your way, I'll be sure to invest in a cheap drill. Thanks for the heads up.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|
|
|
05-02-2013, 06:15 PM
|
#13
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by Festus2
And then there are really poor folks like us who don't have a spare 18V drill to raise and lower the manual jacks. I always thought that manual jacks were exactly that....you had to do it manually.
Sweat? It takes less than 30 secs to either raise or lower 2 jacks by hand and less than 20 to do it with a drill.
|
Wait till you come south and its a 105 in the shade with 85% humidity and you'll wish you had that drill
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
05-07-2013, 10:51 PM
|
#14
|
Junior Member
Join Date: May 2013
Location: Alaska
Posts: 14
|
Cordless drill is the only way to go!
|
|
|
05-08-2013, 02:14 AM
|
#15
|
Senior Member
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 2,117
|
You have to look at the bigger picture. My DW is my camp set-up and tear-down helper. She usually works the stabilizers. To make it easier for HER, we bought a DeWalt cordless drill. And, when we aren't camping, she lets me use her drill in the shop!
__________________
Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
|
|
|
05-08-2013, 02:48 AM
|
#16
|
Senior Member
Join Date: Nov 2012
Location: Virginia
Posts: 865
|
I used to use an electric impact, but because it was very quick and had a lot of torque, I bought a cordless drill to use instead. I still carry the impact just in case I need to make a pit stop ( tire change ) while in route. I should have considered an angle driver though, I could have used it on my X Chocks.
Sent from my iPad using Tapatalk
|
|
|
05-08-2013, 08:21 AM
|
#17
|
Senior Member
Join Date: Oct 2010
Location: Okanagan, BC
Posts: 916
|
Quote:
Originally Posted by Festus2
Scott -
Having never worked in your southern heat, I'm sure it must be very taxing on one's stamina. If I ever get down your way, I'll be sure to invest in a cheap drill. Thanks for the heads up.
|
Don't have to go that far. Come up to the interior in August and I will lend you my drill.
18V Ryobi from HD. I have an angle drill simply because I need it for where I store my trailer.
__________________
2010 Cougar 30RKS
2015 GMC Sierra Max Trailer
"Drinks for 6, Dinner for 4, Sleeps 2"
|
|
|
05-08-2013, 08:26 AM
|
#18
|
Senior Member
Join Date: Oct 2010
Location: Okanagan, BC
Posts: 916
|
Quote:
Originally Posted by Javi
Wait till you come south and its a 105 in the shade with 85% humidity and you'll wish you had that drill
|
See Festus. At least the Okanagan is a dry heat.
__________________
2010 Cougar 30RKS
2015 GMC Sierra Max Trailer
"Drinks for 6, Dinner for 4, Sleeps 2"
|
|
|
05-08-2013, 09:02 AM
|
#19
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by GMcKenzie
See Festus. At least the Okanagan is a dry heat.
|
I might send him mine as I'm working on changing to a Lippert system for the new trailer... push a button is easier than bending over with the drill
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
05-08-2013, 10:05 AM
|
#20
|
Junior Member
Join Date: Aug 2012
Location: Spring, TX
Posts: 16
|
3/4" and I use an 18 v Dewalt drill/driver everytime. Set it on medium and as soon as it touches ground let off the trigger... I never try to lift the trailer more than a 1/2", the scissors just aren't made for lifting a lot of weight... same with retreiving... lickety-split!
__________________
USA2: Lawrence and Lisa witt da dawg-Lila!
and hopefully soon da GRANDBABIES!
2012 keystone Premier Ultra Lite 31BHPR
2010 Ford Supercrew 5.4L w/ Airlifts
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|