lci underchassis storage trays

[rcmike]

Towards the very back underneath my 398,there is two welded brackets on opposite sides, It looks like mounting tabs for the lippert under chassis storage trays. has anyone installed any one of the three that they offer ? thanks part #175180 or part#236558

[ctbruce]

If you get a chance posting a picture or 2 f the tabs will help. Just a thought...

Chip Bruce, RPh
Kansas City, MO
2016 Fuzion Impact 312
2017 3500HD Silverado LTZ

[rcmike]

Installed it This past w/e...i like it a lot

[Rhinoone82]

Where did you purchase that and if you don't mind saying, what was the cost?

[xrated]

I'm thinking about buying one this summer, sometime and installing it on my Impact 303 for some extra storage. That's one thing about the 303, not a lot of storage space (or maybe I'm a pack rat!) Anyway, if I do it, it is going to be a much different mounting process. I'm going to cut the 96" unit in half, just on one side of the brace that's in the middle of the unit. Then add a rail brace for the one that doesn't have the cross brace. Then, both units will be mounted side by side on the same side of the T.H. I just don't have room on the passenger side for the storage unit to be mounted......but there's just enough room on the drivers side of the T.H. to place both halves side by side.

[rcmike]

Originally Posted by Rhinoone82

Where did you purchase that and if you don't mind saying, what was the cost?

I bought it from a friend at a rv dealer here locally. You can go to any rv parts house and get one or amazon and e/bay have them also listed periodically. On those sites there about $300. Its made by LCI and mine is part #175180.

[rcmike]

Originally Posted by xrated

I'm thinking about buying one this summer, sometime and installing it on my Impact 303 for some extra storage. That's one thing about the 303, not a lot of storage space (or maybe I'm a pack rat!) Anyway, if I do it, it is going to be a much different mounting process. I'm going to cut the 96" unit in half, just on one side of the brace that's in the middle of the unit. Then add a rail brace for the one that doesn't have the cross brace. Then, both units will be mounted side by side on the same side of the T.H. I just don't have room on the passenger side for the storage unit to be mounted......but there's just enough room on the drivers side of the T.H. to place both halves side by side.

That's a good idea you have . I really got mine to keep my power cord on one side { that's why I modified it with a set of pad locks although it sits in a warehouse building of mine 24/7 } and your going to laugh,,,, to put my Rc car in depending on which one I'm racing so it does not get more dirty in the garage area ! Its taken away some clearance on the tail end of trailer but I only stay on the pavement during trips but if I must go off ill get my co-pilot to get out and see whats the best way to maneuver.