Quote:
Originally Posted by NJ High Country
I will being picking up our first RV, 2021 Alpine 3220RL, from the dealer soon. I have ordered a B&W Companion 25K to install on my 2020 Chevy 3500 DRW. Does anyone here have any insight on setting up the hitch height? I should've measured the king pin to ground to have some sort of height (and allow for suspension compression). Will the dealers adjust the pin box to whatever I set the hitch height at? Thank you in advance!
|
You're getting into a "he did/she did" type of situation... If you just install the hitch in the truck, let the dealer adjust the hitch height/pinbox position together, so they can "reach the best adjustment for both...
It may be (then it may not be) that the hitch is properly adjusted "as it comes from B&W." If you go adjusting it, you may raise it so high that the dealer either has to lower it or raise the pinbox (unnecessarily) to accommodate what you did... Then, with the hitch adjusted higher, you might find that when you want to install a tonneau cover, your hitch won't clear and you have to "redo everything so the tonneau cover will close....
I'd recommend just "put the hitch in the truck and see what needs adjustment "when the truck/hitch/trailer all all three in the same place at the same time....