Hello, we are looking to setup some simple solar in our 1750 camper, we have 2 campers so the idea was to have something we could use in both or our house incase of power issues. To use our solar generator a Bluetti AC200 i was looking at connecting the Bluetti's XT60 DC 12v Output (25amps) to the WFCO WF-8735P power center in the SM1750, by installing a MGS Battery Switch to disconnect the camper's battery (RED + terminal) in the power center and connect the 12v positive/Negative from my Bluetti AC200 using the XT60 output wire rated for 25amps to the (+/- terminals) in the power center.
This seem like something to ask about since the idea was when we were not plugged in to shore power we could flip the switch and the bluetti would power all the 12v accessories/lights etc and by pass the the 8735p built in battery charger and main battery. Looking at the fuses in the power center there is one rated at 30amps #F6, which looks like the (+) fuse for the battery so the rest #f1-F5 are rated 15amps and im guessing the lights will get power no problem being LED and since the fridge/heater/water heater run on propane i could run all those also or would I maybe need to make sure i run only 1 or 2 at a time?
Any info or feed back about this setup would be appreciated since this is my fist time trying this
Thanks
Power Center WFCO WF-8735P
(PIC Attached)
Links:
-MGS Battery Switch
https://www.amazon.com/gp/product/B0...A29GVIP277705M
-12awg XT60 cable to power center
https://www.amazon.com/Connector-Ban...xpY2s9dHJ1ZQ==
-Panel Mount XT60 12awg for easy connection
https://www.ebay.com/itm/Panel-Mount...53.m1438.l2649
-Bluetti AC200 Power station &
-$16 12V / 25A aviation plug to XT60
https://www.indiegogo.com/projects/b...n/x/24269734#/