|
|
08-04-2013, 05:09 PM
|
#1
|
Senior Member
Join Date: Jun 2013
Location: Las Vegas NV
Posts: 127
|
Toy hauler garage chock
I need to figure out how to secure my Harley dresser in the back of my Fuzion 300, anyone have some suggestions or recommendations ? Thanks
|
|
|
08-04-2013, 10:06 PM
|
#2
|
Member
Join Date: Apr 2013
Posts: 80
|
Quote:
Originally Posted by skidooxman
I need to figure out how to secure my Harley dresser in the back of my Fuzion 300, anyone have some suggestions or recommendations ? Thanks
|
Go with the Bolt it on system. I have a BMW GS, WR250 and 2 more bikes for the kids and it's rock solid.
Make sure you order the LONG J bolts since the Fuzion has the flush mounting points. The regular ones work for the flip up D rings.
|
|
|
08-05-2013, 07:27 AM
|
#3
|
Member
Join Date: Jul 2010
Location: Maryland
Posts: 46
|
I use a condor wheel chock for my Road Glide. It's easy to use and it securely holds the bike in place.
__________________
2010 Fuzion 405
06 Chevy CC Dually, Banks 6 gun & Monster Duals
|
|
|
08-05-2013, 10:16 AM
|
#4
|
Member
Join Date: Apr 2013
Posts: 80
|
I won't go into the whole philosophical reasoning of trailering a street bike around in a trailer though.
|
|
|
08-05-2013, 05:15 PM
|
#5
|
Senior Member
Join Date: Jun 2012
Location: Ontario,Califorina
Posts: 415
|
I installed a removable wheel chalk. For a 2009 springer screamin eagle. You have to remove the bottom and since your there add more type downs ... One more comment you guys that ride to Laughlin or sturges your bike looks like crap when you get there. Mine is pretty
__________________
Randy69
2010 361lev
f350 larriet 4x4
|
|
|
08-05-2013, 05:38 PM
|
#6
|
Senior Member
Join Date: May 2013
Location: alabama
Posts: 272
|
i use 2 devices
I mounted pingles in my 3912 me n dad have a 08 Vulcan 900 lt and a suzuiki boulevard trike by leighman. they both fit. the swcond device is a block of wood under the frame. I collapse the shocks down to the blocks n roll. as for trailering my bike. I burnt my tent last year. when we roll to a bike rally. we have heat and ac. you may look cool on your grimy bike but I am sleeping in my bed regardless.
|
|
|
08-05-2013, 07:41 PM
|
#7
|
Member
Join Date: Apr 2013
Posts: 80
|
You guys are way too easy, I wasn't even using fresh bait!
I'm actually ok with not having a clean bike:
|
|
|
08-07-2013, 03:01 AM
|
#8
|
Member
Join Date: Feb 2013
Location: PA
Posts: 30
|
Wheel chock
This is what I use in my Fuzion 300.
http://www.harborfreight.com/motorcy...ock-97841.html
No holes to drill for mounting, I place it against the front wall and tie my Goldwing down with 6 straps. 2 pulling front, 2 side to side and 2 pulling back. The chock holds the 1000 pound wing upright to allow strapping to begin. When the bike stay home the chock is removed.
Hope that helps!!!!! Good luck in whatever you decide. Mike
__________________
2011 F-250 Lariat Crewcab 6.2 gas
2013 Fuzion 300
|
|
|
08-07-2013, 06:16 AM
|
#9
|
Junior Member
Join Date: Aug 2012
Location: Mehoopany, PA
Posts: 29
|
Quote:
Originally Posted by mwhit
This is what I use in my Fuzion 300.
http://www.harborfreight.com/motorcy...ock-97841.html
No holes to drill for mounting, I place it against the front wall and tie my Goldwing down with 6 straps. 2 pulling front, 2 side to side and 2 pulling back. The chock holds the 1000 pound wing upright to allow strapping to begin. When the bike stay home the chock is removed.
Hope that helps!!!!! Good luck in whatever you decide. Mike
|
This is a good looking set up, and I really like the price tag on it. It's way cheaper than the $250+ I spent on the LA Chock that I use
http://www.baxleycompanies.com/LAChock.html
__________________
'11 GMC 3500 Diesel Dually
'13 Keystone Fuzion 360
Toys to be hauled:
'08 Can-Am Outlander 650 Max XT
'04 Honda 450 ES Foreman
'03 BMW K1200LT
|
|
|
08-07-2013, 06:44 AM
|
#10
|
Member
Join Date: Apr 2013
Posts: 80
|
That one from Baxley is a pretty good setup, we used to use something really similar to that in the pits for our road racing bikes, you could pull into the pit and just run it in and get off the bike. Since we didn't have kickstands it was perfect. Stable too.
I think the harbor freight one would probably work ok since you're tying the bike down, it's not like you're trying to work on the bike with the thing.
|
|
|
08-07-2013, 03:51 PM
|
#11
|
Junior Member
Join Date: Jul 2013
Location: Maryland
Posts: 10
|
Quote:
Originally Posted by skidooxman
I need to figure out how to secure my Harley dresser in the back of my Fuzion 300, anyone have some suggestions or recommendations ? Thanks
|
Just put it on its left side and strap it down really good to the built in tie-downs. When we get where we are going we will check to see how that works out. Live on the edge man! Looking forward to September trip!
__________________
__________________________________
2011 Chevrolet 2500HD Duramax-Allison
B&W Turnoverball with a Companion Slider
2013 Fuzion 310 Monster Package
|
|
|
08-07-2013, 04:30 PM
|
#12
|
Senior Member
Join Date: May 2012
Location: Alaska
Posts: 213
|
Get the Condor. If you internet search you can find them for around 2 bills.
I do not screw mine down to the floor nor do I place it up against the wall. I have it set back far enough to open the door (I carry two or three bikes at times, combination of these three at any time, V Rod, Street Bob and a Phantom) and enter the garage from the living area. I did drill holes in the Condor for "S" hooks on either side so this keeps the bike secured in the Condor. Then I run the normal tiedowns from the bike to the trailer. Basically 6 straps per bike if we are traveling the ALCAN or I skip the Condor straps for short trips with good roads. Also when I know I am going to cross rough roads I will use a custom wood block under the frame of the bike and tighten the bike down to the block for zero movement setup.
If the bikes are strapped properly the Condor does not move. When I get to camp spot I use the Condors under the awning because the bikes don't take up as much room when set upright vs the side stands and never a worry about getting knocked over. Both my wife and daughter can easily pull their bikes out of the chock with a change in lower pin location. It does fold down pretty flat for storage if you find a reason not to be using it.
Here is a random link to the condor I am using....
http://www.motorcycle-superstore.com...FUfZQgodhDEAwA
|
|
|
08-07-2013, 04:32 PM
|
#13
|
Member
Join Date: Feb 2013
Location: PA
Posts: 30
|
Don't try that
Quote:
Originally Posted by vbortch
Just put it on its left side and strap it down really good to the built in tie-downs. When we get where we are going we will check to see how that works out. Live on the edge man! Looking forward to September trip!
|
FWIW do not tie down resting on the side stand. Way too much force will be transferred into the frame being so solid. When the bike is tied down the shocks should be compressed but not totally. The bike should have a bit of travel to soften the ride. I have been hauling bikes for years and this method has never failed me yet. Spend as much or as little as you like, several ways to skin a cat. But strapped on the side stand I will not endorse.
Good luck in your choice. Mike
__________________
2011 F-250 Lariat Crewcab 6.2 gas
2013 Fuzion 300
|
|
|
08-07-2013, 04:42 PM
|
#14
|
Senior Member
Join Date: Jun 2012
Location: Ontario,Califorina
Posts: 415
|
Quote:
Originally Posted by Adventurider
You guys are way too easy, I wasn't even using fresh bait!
I'm actually ok with not having a clean bike:
|
. That's a nice bike but really look funny around a Harley run
__________________
Randy69
2010 361lev
f350 larriet 4x4
|
|
|
08-07-2013, 05:17 PM
|
#15
|
Junior Member
Join Date: Jul 2013
Location: Maryland
Posts: 10
|
Quote:
Originally Posted by mwhit
FWIW do not tie down resting on the side stand. Way too much force will be transferred into the frame being so solid. When the bike is tied down the shocks should be compressed but not totally. The bike should have a bit of travel to soften the ride. I have been hauling bikes for years and this method has never failed me yet. Spend as much or as little as you like, several ways to skin a cat. But strapped on the side stand I will not endorse.
Good luck in your choice. Mike
|
Mike, if you didn't pick up on it, I was just messing with my best friend. Obvious joke.
__________________
__________________________________
2011 Chevrolet 2500HD Duramax-Allison
B&W Turnoverball with a Companion Slider
2013 Fuzion 310 Monster Package
|
|
|
08-07-2013, 05:55 PM
|
#16
|
Member
Join Date: Feb 2013
Location: PA
Posts: 30
|
Did not know the connection, sorry for the serious note.
I guess it would not hurt a Harley anyway!!!!!!! lol
Sorry for that!!!!!
Quote:
Originally Posted by vbortch
Mike, if you didn't pick up on it, I was just messing with my best friend. Obvious joke.
|
__________________
2011 F-250 Lariat Crewcab 6.2 gas
2013 Fuzion 300
|
|
|
08-10-2013, 01:42 PM
|
#17
|
Senior Member
Join Date: Jun 2013
Location: Las Vegas NV
Posts: 127
|
Thanks everyone, I have already made a trip from NY to LA on the bike, now I want to camp and bring the bike along with the family. Camping is a little cheaper then hotels and more relaxing. The condor was most expensive but seems to be the best non-fixed mount
|
|
|
08-10-2013, 03:55 PM
|
#18
|
Senior Member
Join Date: May 2012
Location: Alaska
Posts: 213
|
Quote:
Originally Posted by skidooxman
Thanks everyone, I have already made a trip from NY to LA on the bike, now I want to camp and bring the bike along with the family. Camping is a little cheaper then hotels and more relaxing. The condor was most expensive but seems to be the best non-fixed mount
|
I will get a picture of my set up. Shop around as they are places that have them cheaper, but you will not find a better made chock. There was one chock mentioned that was around $259....way expensive for a steel chock.
|
|
|
08-11-2013, 01:34 PM
|
#19
|
Senior Member
Join Date: May 2012
Location: Alaska
Posts: 213
|
Sorry about Pics but it is still raining here so I just took the pics in my shop. Do not use cheap straps like the red one in the pics. Get good quality heavy ones. The one on the left in the front shot came from Walmart and as you see is a 2 inch web with a double hook and a twist to help at attachment point.
Something to consider when pulling your bike down with straps. Make sure that you take enough of the suspension travel out to ensure that you do not get to much slack in your straps that they may come dislodged. With a Condor it is not that huge of a deal as the bike would stay pretty much upright for quite some time without anything holding it. That is one of the reasons I have blocks made for underneath mine. I only compress the suspension maybe a 1/4 to 1/2 inch and then the bikes come down solid on the blocks not allowing anymore suspension travel, plus my garage is packed. Especially when I get 3 bikes loaded in there.
So other then the 2 straps on the rear, the other front strap and my wood block, this is how my bikes roll in style.
|
|
|
08-11-2013, 06:03 PM
|
#20
|
Member
Join Date: Feb 2013
Location: PA
Posts: 30
|
Strap info
There are straps available with a safety latch the keep the s hook type hook from being able to unhook. These are the ticket to keep from unhooking as you snug up your bike with out completely compressing the suspension.
http://www.ratchetstraps.com/vinyl-s-hook-with-latch
__________________
2011 F-250 Lariat Crewcab 6.2 gas
2013 Fuzion 300
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|