|
10-13-2016, 05:15 AM
|
#1
|
Member
Join Date: Oct 2016
Location: Orillia
Posts: 88
|
King pin plate measurements
I am looking at a used pullrite hitch. They need to use a capture plate. I just want to make sure this one will work and I am not close to the trailer. Is there a site that lists the king pin measurements for the trailers
Thank you
|
|
|
10-13-2016, 02:22 PM
|
#2
|
Senior Member
Join Date: Jul 2013
Location: Box Elder
Posts: 2,907
|
Re: King pin plate measurements
You will need to know what pin box is installed on the rig. You can find the fit chart for the PullRite hitch capture plates at this site. http://www.pullrite.com/content/fit-charts You can also just use a universal capture plate kit too.
__________________
Bob & Becky
2012 3402 Montana
2012 Chevy 2500HD D/A CC
|
|
|
10-17-2016, 06:58 AM
|
#3
|
Member
Join Date: Apr 2016
Location: Richmond, TX
Posts: 99
|
Re: King pin plate measurements
I have a catch plate from my old PullRite slider setup. It is the Mor/ryde one. Happy to sell to you if you are interested at a lot less.
http://www.pullrite.com/sites/defaul...it%20Chart.pdf
__________________
BtLW . . .
We're not here for a LONG TIME, We're here for a GOOD TIME! HOOH!
2016 Fuzion Chrome 420 18.5k, '16 F350 DRW PSD CCLB, LKR Fx4, WH Platinum Tri, 4.1 LSD, MR, PullRite OE 25K 5th, High CT, EB Heater, Tailgate Step, Recon RL's, Air Lift System, TruXcedo Lopro, DZ TG Assist, KC Lights, Pop&Lock TG, Cable Lock
|
|
|
10-20-2016, 08:56 AM
|
#4
|
Member
Join Date: Oct 2016
Location: Orillia
Posts: 88
|
Re: King pin plate measurements
Thanks everyone .. Got it all done and installed . It works great..
Thanks Lone Wolf for the offer.. That plate will not work on my trailer anyways.. Would have been nice to get one used though as they are a fortune in Canada..
__________________
2013 Dodge Ram 2500 4X4 Diesel
Pullrite SuperGlide 16K Hitch
2011 Cougar 327 RES
|
|
|
10-27-2016, 08:55 AM
|
#5
|
Member
Join Date: Apr 2016
Location: Richmond, TX
Posts: 99
|
Re: King pin plate measurements
Quote:
Originally Posted by Irish Mist
I am looking at a used pullrite hitch. They need to use a capture plate. I just want to make sure this one will work and I am not close to the trailer. Is there a site that lists the king pin measurements for the trailers
Thank you
|
Yes it is listed 2 times below. Here it is again:
http://www.pullrite.com/sites/defaul...it%20Chart.pdf
__________________
BtLW . . .
We're not here for a LONG TIME, We're here for a GOOD TIME! HOOH!
2016 Fuzion Chrome 420 18.5k, '16 F350 DRW PSD CCLB, LKR Fx4, WH Platinum Tri, 4.1 LSD, MR, PullRite OE 25K 5th, High CT, EB Heater, Tailgate Step, Recon RL's, Air Lift System, TruXcedo Lopro, DZ TG Assist, KC Lights, Pop&Lock TG, Cable Lock
|
|
|
10-27-2016, 09:14 AM
|
#6
|
Member
Join Date: Apr 2016
Location: Richmond, TX
Posts: 99
|
Re: King pin plate measurements
Quote:
Originally Posted by Irish Mist
I am looking at a used pullrite hitch. They need to use a capture plate. I just want to make sure this one will work and I am not close to the trailer. Is there a site that lists the king pin measurements for the trailers
Thank you
|
Yes it is listed 2 times below. Here it is again:
http://www.pullrite.com/sites/defaul...it%20Chart.pdf
__________________
BtLW . . .
We're not here for a LONG TIME, We're here for a GOOD TIME! HOOH!
2016 Fuzion Chrome 420 18.5k, '16 F350 DRW PSD CCLB, LKR Fx4, WH Platinum Tri, 4.1 LSD, MR, PullRite OE 25K 5th, High CT, EB Heater, Tailgate Step, Recon RL's, Air Lift System, TruXcedo Lopro, DZ TG Assist, KC Lights, Pop&Lock TG, Cable Lock
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|