|
|
03-24-2015, 06:55 AM
|
#41
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Sorry to bring back this old post but I have an Andersen Aluminum hitch and safety chains being delivered this week, anyone having any issues? I'm 100% VA disabled so the 35lbs was the biggest bonus for me, that and I already have a gooseneck ball installed in my truck.
Just looking for updates.
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
03-24-2015, 07:21 AM
|
#42
|
Junior Member
Join Date: May 2013
Location: Rayne, LA
Posts: 5
|
I'm glad you brought it back up, I wasn't aware that they made an aluminum version yet.
I have the original version and the only issue that I have had is it wants to turn in the bed of the truck if you don't have a spray-in liner or rubber bed mat to give it some traction. I have a mat in the bed of my truck now and love mine. I even got into a sticky situation in Dallas pulling my 39' Montana (approx. 16K lbs. loaded) and had to do some evasive maneuvering without issue. I admit, I was a little skeptical when I first put it in, but now I trust it completely.
|
|
|
03-24-2015, 07:27 AM
|
#43
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
I just received and installed my new Andersen Ultimate aluminum last weekend. No test pulls yet, but I'm itching to go try it.
My old TV (97 Dodge Ram 2500 CTD) had a Valley (Husky) 16k 2 way pivot 5er hitch on above bed rails. My new to me TV (07 Ram 2500 CTD) has a gooseneck ball in the bed (non-turnover, which will get replaced with a turnover ball soon). I wanted a clean bed when not towing, so a turnover ball and the Andersen seemed like the way to go.
Will update after the first tow or two.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
03-24-2015, 07:37 AM
|
#44
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Quote:
Originally Posted by smbrouss70
I'm glad you brought it back up, I wasn't aware that they made an aluminum version yet.
I have the original version and the only issue that I have had is it wants to turn in the bed of the truck if you don't have a spray-in liner or rubber bed mat to give it some traction. I have a mat in the bed of my truck now and love mine. I even got into a sticky situation in Dallas pulling my 39' Montana (approx. 16K lbs. loaded) and had to do some evasive maneuvering without issue. I admit, I was a little skeptical when I first put it in, but now I trust it completely.
|
Good to know, I do have the spray in bed liner so I hope that isn't going to be an issue!
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
03-24-2015, 07:39 AM
|
#45
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
Quote:
Originally Posted by hdrolling
Good to know, I do have the spray in bed liner so I hope that isn't going to be an issue!
|
I have a rubber bed mat in the truck - I asked Andersen if it was ok to install over the mat or if it should come out. They not only said it was ok to install on top the mat, then encouraged it.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
03-24-2015, 07:45 AM
|
#46
|
Senior Member
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
|
I have the steel (75#), gooseneck version with a Rhinolined bed. Absolutely no issues. Highly recommended.
Check the torque on the kingpin adapter allen bolts after awhile from the initial installation.
www.andersenhitches.com
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
|
|
|
03-24-2015, 09:43 AM
|
#47
|
Senior Member
Join Date: Jul 2014
Location: Currituck, NC
Posts: 356
|
Same here.... Installed with Rhino mat. Very happy with the setup
__________________
Steve & Amy
2017 Winnebago Aspect 30J
Previously :
2015 Jayco 31UL MH
2015 Cougar X-Lite 29RLI
|
|
|
03-24-2015, 09:49 AM
|
#48
|
Senior Member
Join Date: Jul 2014
Location: Currituck, NC
Posts: 356
|
Quote:
Originally Posted by Desert185
I have the steel (75#), gooseneck version with a Rhinolined bed. Absolutely no issues. Highly recommended.
Check the torque on the kingpin adapter allen bolts after awhile from the initial installation.
www.andersenhitches.com
|
Second that on the checking of torque values, both the coupler and hitch. I've added that to my check-off list before each trip along with lug nut torqueing. Have the wrench out anyway!!!
__________________
Steve & Amy
2017 Winnebago Aspect 30J
Previously :
2015 Jayco 31UL MH
2015 Cougar X-Lite 29RLI
|
|
|
03-29-2015, 04:55 PM
|
#49
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
Made a trial tow up the little hill just west of me today (I-70 Golden, CO to Floyd Hill - just a short run). Almost all new everything to kick off this camping season. New to me TV - '07 Ram CTD (sold my '97) that came with a gooseneck ball installed. I bought the Andersen Ultimate aluminum hitch and hooked up my '10 Laredo 245 RL.
The hitch, plus the ball to kingpin adapter puts the kingpin about 6" behind the axle, a bit further back than my '97 rode with the Valley 16k hitch but everything cleared tailgate and bed so I'm happy with that.
One little heartstopping "clunk" (aren't we all hair-triggered for "something" to go wrong on a test tow?). Apparently I did not securely latch the tailgate and it fell open with a loud clunk. Whew, minor details and deep breath! However, 5 minutes later something else clunked! Near as I can tell nothing moved or broke, so maybe the hitch just settled in or shifted on the gooseneck ball.
Noticeable lack of chuck or slop in this hitch when compared to my Valley.
Very easy to hook up, easy to line up and back under - just as easy as my traditional 5er hitch.
Still have to control the EGT on the '07 like I did on the '97 for the big pull(s) heading west of here but having the 6 speed manual over the old auto gives me better gear matching now.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
03-29-2015, 04:55 PM
|
#50
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
4 pic limit.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
03-29-2015, 05:08 PM
|
#51
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Quote:
Originally Posted by gkainz
Made a trial tow up the little hill just west of me today (I-70 Golden, CO to Floyd Hill - just a short run). Almost all new everything to kick off this camping season. New to me TV - '07 Ram CTD (sold my '97) that came with a gooseneck ball installed. I bought the Andersen Ultimate aluminum hitch and hooked up my '10 Laredo 245 RL.
The hitch, plus the ball to kingpin adapter puts the kingpin about 6" behind the axle, a bit further back than my '97 rode with the Valley 16k hitch but everything cleared tailgate and bed so I'm happy with that.
One little heartstopping "clunk" (aren't we all hair-triggered for "something" to go wrong on a test tow?). Apparently I did not securely latch the tailgate and it fell open with a loud clunk. Whew, minor details and deep breath! However, 5 minutes later something else clunked! Near as I can tell nothing moved or broke, so maybe the hitch just settled in or shifted on the gooseneck ball.
Noticeable lack of chuck or slop in this hitch when compared to my Valley.
Very easy to hook up, easy to line up and back under - just as easy as my traditional 5er hitch.
Still have to control the EGT on the '07 like I did on the '97 for the big pull(s) heading west of here but having the 6 speed manual over the old auto gives me better gear matching now.
|
Looks good, I just received and installed mine last week along with the Timbren SES just in case. My camper got here tonight and I take delivery in the morning so I'll see how I like mine soon.
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
11-17-2015, 04:15 AM
|
#52
|
Senior Member
Join Date: Nov 2012
Location: Pace, FL
Posts: 131
|
Time to revive this again rather than start a new thread.
Got a new truck coming on Thurs. and am really considering this hitch set up.
Anyone have issues with the aluminum version?
__________________
Travis Richards
WERA #13
'13 Raptor 300mp
'11 F350 6.7L CC DRW FX4
|
|
|
11-17-2015, 05:19 AM
|
#53
|
Senior Member
Join Date: Mar 2015
Location: Grays Creek, NC
Posts: 334
|
Quote:
Originally Posted by T11ravis
Time to revive this again rather than start a new thread.
Got a new truck coming on Thurs. and am really considering this hitch set up.
Anyone have issues with the aluminum version?
|
No issues here. It really is a great set up if you already have a goose neck ball in the bed.
I went camping with my brother a couple months ago and he had the 200lb + hitch installed in his 3500 SRW GMC. He couldn't believe how light and easy my Anderson was to install and remove from my truck, you won't be sorry!
__________________
2018 Chevy LTZ 3500 4X4, DRW, QC, 6.6L TD, Factory trailer prep, Andersen Aluminum hitch
2015 Raptor 332TS 38' Toyhauler, Maxxis M8008,Splendide 2100XC, Winegard RoadTrip Mission satellite dish, King sleep number bed
Retired Army, 22yrs
|
|
|
11-17-2015, 06:20 AM
|
#54
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
no issues ... I still love mine. I am changing out the fixed gooseneck ball this winter to a turn-over ball so I can have a flat bed when not towing.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
11-17-2015, 07:39 AM
|
#55
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
There has been a few Andersen's AL that have bent under hard braking. Andersen has remedied the situation with a longer aluminum sleeve that goes over the ball. See post #275 in link below. I have the older version and will watch it I'm only around 11K.
http://www.cumminsforum.com/forum/20...eviews-23.html
Post #275
|
|
|
11-18-2015, 08:07 AM
|
#56
|
Senior Member
Join Date: Nov 2012
Location: Pace, FL
Posts: 131
|
Quote:
Originally Posted by kfxgreenie
There has been a few Andersen's AL that have bent under hard braking. Andersen has remedied the situation with a longer aluminum sleeve that goes over the ball. See post #275 in link below. I have the older version and will watch it I'm only around 11K.
http://www.cumminsforum.com/forum/20...eviews-23.html
Post #275
|
Thanks for the info.
__________________
Travis Richards
WERA #13
'13 Raptor 300mp
'11 F350 6.7L CC DRW FX4
|
|
|
11-25-2015, 09:53 AM
|
#57
|
Senior Member
Join Date: Jul 2014
Location: Nevada
Posts: 2,695
|
I have the gooseneck steel version (with a B&W turnover ball) because the aluminum version wasn't out when I bought. Given Andersen's record of excellent customer service, I wouldn't hesitate to buy anything Andersen, including the aluminum version. It's a terrific hitch from a reputable company.
__________________
Desert185 🇺🇸 (Retired Chemtrail vendor)
-Ram 2500 QC, LB, 4x4, Cummins HO/exhaust brake, 6-speed stick.
-Andersen Ultimate 24K 5er Hitch.
-2014 Cougar 326SRX, Maxxis tires w/TPMS, wet bolts, two 6v batts.
-Four Wheel 8' Popup Camper.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|