361TG satellite/cable routing

[mcwilems]

We recently tried to hook cable up throughout the rig by attaching to the top connection inlet outside. I looped the main living area box but could only get a signal to the front bedroom tv. Can someone please explain how to get the signal to the bunkhouse, outdoor kitchen and the front storage area? And what is the purpose of the lower connection point?
Thanks

[MarkS]

If you have two outside cable connections, one is for a satellite receiver that goes directly to the main entertainment center. It does not connect to the other tv's.

The second is for campground cable and antenna. That one connects to all the tv's. Be sure to turn the antenna off when you use it for cable.

[jje1960]

Do you have two coax connection very close to each other like this? If so, your setup may be like ours, the 5th wheel came with a short bridge connection between the two which connected everything together. I've completely rewired everything with junction boxes so I don't have the original shunt anymore to take a picture of.

[mcwilems]

I like the idea of rewiring with junction boxes. How did you do it?
Thanks for the info.

[jje1960]

Originally Posted by mcwilems

I like the idea of rewiring with junction boxes. How did you do it?
Thanks for the info.

It's been a couple of years, I'll take a picture when I have a moment and post, not a big deal, I did it when I installed a sat dome on the unit.