Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Travel Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 03-28-2013, 09:57 AM   #1
GMSIMS
Junior Member
 
Join Date: Feb 2013
Location: Springfield, VA
Posts: 25
Trailer brakes to reduce rocking ?

Any reason that I wouldn't be able to (or shouldn't) use the brakes on my TT to reduce rocking back and forth while parked at the campsite? I was thinking that I could pull the break away cable out of the TT as a temporary fix this weekend while I wait for my X-chocks to arrive.

Thanks
Greg
GMSIMS is offline   Reply With Quote
Old 03-28-2013, 10:08 AM   #2
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
1) It sucks power. Not *that* big of a deal if you're plugged in
2) It keeps the electromagnet activated. If it's anything like a solenoid, it heats up when constantly powered. I'd avoid leaving it active for long periods of time.
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 03-28-2013, 10:14 AM   #3
SteveC7010
Senior Member
 
SteveC7010's Avatar
 
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
Quote:
Originally Posted by GMSIMS View Post
Any reason that I wouldn't be able to (or shouldn't) use the brakes on my TT to reduce rocking back and forth while parked at the campsite? I was thinking that I could pull the break away cable out of the TT as a temporary fix this weekend while I wait for my X-chocks to arrive.

Thanks
Greg
Only if you want to destroy the battery the first time out. Your battery will run down in an hour or less, and the constant heavy current draw might kill the convertor as well. Constant depletion of the battery will ruin it real quick. This is not a solution.

Grab four short pieces of 4x4 lumber. Site the trailer. Place a block behind the rear wheels. Drive the trailer back a couple of inches so that the tires are just starting to climb up the block. Hit the brakes with TV and have someone place a block in front of the front wheels of the trailer. Put the truck in Neutral and release the brakes. The trailer should settle nicely with the four blocks firmly wedged under the tires to the point that you can not pull them out by hand. If not, repeat the procedure.
__________________

'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
SteveC7010 is offline   Reply With Quote
Old 03-28-2013, 10:24 AM   #4
GMSIMS
Junior Member
 
Join Date: Feb 2013
Location: Springfield, VA
Posts: 25
Thanks for the input. I'll just use the wood to avoid any issues.

Happy Easter

-Greg-
GMSIMS is offline   Reply With Quote
Old 03-28-2013, 11:49 AM   #5
GaryWT
Senior Member
 
GaryWT's Avatar
 
Join Date: Feb 2013
Location: MA
Posts: 3,153
That is an interesting method. I have always just used the small yellow chocks on the wheels but generally just set them there.
GaryWT is offline   Reply With Quote
Old 03-28-2013, 12:09 PM   #6
davidcyndi
Senior Member
 
davidcyndi's Avatar
 
Join Date: Mar 2013
Location: Katy, Texas
Posts: 161
Invest in some x chocks.
__________________
Tow rig - 2012 f250 6.7l turbo diesel FX4 quad cab Super Duty
Camper - 2013 Keystone Sprinter 311bhs
Grocery getter - 2012 BOSS302

"AUTISM IS NOT A TRAGEDY. IGNORANCE IS THE TRAGEDY."

https://i.imgur.com/3IyXHzt.png
davidcyndi is offline   Reply With Quote
Old 03-28-2013, 12:14 PM   #7
apr67
Member
 
Join Date: Mar 2013
Location: Tallahassee, Florida
Posts: 51
Trailer brakes require movement before they work, unless they have changed in the last few years.

The electromagnet gets pulled by the rotation of the drum when it activates.
apr67 is offline   Reply With Quote
Old 03-28-2013, 12:25 PM   #8
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
Really? I thought the trailer was dead in the water if you pulled the pin. I thought this was how people tested the breakaway system.

Quote:
Originally Posted by apr67 View Post
Trailer brakes require movement before they work, unless they have changed in the last few years.

The electromagnet gets pulled by the rotation of the drum when it activates.
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 03-28-2013, 01:46 PM   #9
SteveC7010
Senior Member
 
SteveC7010's Avatar
 
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
Quote:
Originally Posted by GaryWT View Post
That is an interesting method. I have always just used the small yellow chocks on the wheels but generally just set them there.
If you don't get a bit of weight from the trailer onto the chock, it's not going to have any effect on the rocking.
__________________

'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
SteveC7010 is offline   Reply With Quote
Old 03-28-2013, 03:47 PM   #10
GaryWT
Senior Member
 
GaryWT's Avatar
 
Join Date: Feb 2013
Location: MA
Posts: 3,153
Quote:
Originally Posted by SteveC7010 View Post
If you don't get a bit of weight from the trailer onto the chock, it's not going to have any effect on the rocking.

I understand that but the rocking never really bothered me so I never worried too much about it but maybe we will. I have looked online at X chocks for wide wheel base, they seem to run about $100.
GaryWT is offline   Reply With Quote
Old 03-28-2013, 04:46 PM   #11
apr67
Member
 
Join Date: Mar 2013
Location: Tallahassee, Florida
Posts: 51
Quote:
Originally Posted by f6bits View Post
Really? I thought the trailer was dead in the water if you pulled the pin. I thought this was how people tested the breakaway system.
http://www.ehow.com/how-does_4885424...kes-work_.html
apr67 is offline   Reply With Quote
Old 03-28-2013, 05:50 PM   #12
SteveC7010
Senior Member
 
SteveC7010's Avatar
 
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
Quote:
Originally Posted by GaryWT View Post
I understand that but the rocking never really bothered me so I never worried too much about it but maybe we will. I have looked online at X chocks for wide wheel base, they seem to run about $100.
These chocks were made right in my own shop. They are just a few pieces of 4x4 pressure treat cut to size and shape. The hardware is 1/2" threaded rod with matching nuts and flat washers. I fancied mine up a bit with a 1/2" eyebolt and coupler, but that is icing on the cake. They could be built out of 4x6 or even 6x6 and can be sized for any axle spacing.

__________________

'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
SteveC7010 is offline   Reply With Quote
Old 03-28-2013, 06:43 PM   #13
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
Nice article. Gotta love eHow.

Ok, so it's not a centrifugal thing. The magnet "attaches" to a point on the drum and pulls the actuator arm. So if the trailer is parked with the breakaway switch activated, the brake will engage as the drum begins to rotate.

In other words, it won't stop the rocking.

Quote:
Originally Posted by apr67 View Post
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 03-29-2013, 10:18 AM   #14
apr67
Member
 
Join Date: Mar 2013
Location: Tallahassee, Florida
Posts: 51
Quote:
Originally Posted by f6bits View Post
Nice article. Gotta love eHow.

Ok, so it's not a centrifugal thing. The magnet "attaches" to a point on the drum and pulls the actuator arm. So if the trailer is parked with the breakaway switch activated, the brake will engage as the drum begins to rotate.

In other words, it won't stop the rocking.
Bingo Bango.
apr67 is offline   Reply With Quote
Old 03-31-2013, 04:03 AM   #15
rjsurfer
Senior Member
 
Join Date: Mar 2010
Posts: 452
Quote:
Originally Posted by apr67 View Post
Bingo Bango.
Bingo bango +2

Brakes will NOT work when stationary.

Ron W.
rjsurfer is offline   Reply With Quote
Old 03-31-2013, 10:10 AM   #16
mhs4771
Senior Member
 
mhs4771's Avatar
 
Join Date: Jan 2011
Location: Central Florida
Posts: 478
Most "Break-a-Way" Switches are only designed to handle the high current to the brake magnets for a short period of time. If you pull the pin and leave it out, more than likely you'll melt the switch assembly if the battery/batteries don't go dead first.
__________________
2011 Chevy Silverado 3500HD Ext Cab LT DRW Duramax/Allison pulling a 2012 SOB (still Thor, but not a Keystone), Dual ACs, 4 Door Fridge, Fireplace, Sleep Number Bed, Level-Up Auto Levelers, Disc Brakes, Winegard DirecTV SlimLine Auto Dish, Onan 5.5K, Splendide Combo Washer/Dryer, GY G114s on HiSpec 17.5 wheels, TrailAir Tri-Glide Pin Box, Mor/ryde IS.

Michelle & Ann Sullivan and 4 American Shorthairs
mhs4771 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 12:39 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.