|
11-03-2019, 04:45 PM
|
#1
|
Junior Member
Join Date: Aug 2019
Location: Olympia
Posts: 19
|
Seal on Wire Slideout
I have the slideouts that use wire to pull them in/out. One of the pieces of rubber that seal the wire to the weather stripping has come loose. Does anyone know what is use to secure the piece of rubber to the seal?
|
|
|
11-03-2019, 04:52 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,351
|
Super glue.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
11-03-2019, 04:56 PM
|
#3
|
Junior Member
Join Date: Aug 2019
Location: Olympia
Posts: 19
|
Have you used that? Wasn't sure how it would work on the rubber. Thought about 3M77 contact spray... that seems to sticks things together very well.
|
|
|
11-03-2019, 04:59 PM
|
#4
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,351
|
Yes I have, but it’s been a while since I dealt with cable slides. As I remember it was a few years ago on a customers unit and it never came back.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
11-03-2019, 05:02 PM
|
#5
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
Quote:
Originally Posted by cag
Have you used that? Wasn't sure how it would work on the rubber. Thought about 3M77 contact spray... that seems to sticks things together very well.
|
Contact spray will make a mess (overspray that's difficult to clean up). Super Glue gel is what I've used successfully. Just wear rubber gloves while handling the rubber strip. At least you can pull the rubber gloves off and go for help. If you glue yourself to the side of the trailer, it's tough to dial 911
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
11-03-2019, 05:57 PM
|
#6
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,695
|
I used black automotive sealant/glue meant for windshields and such. It's held good for a couple of years. Never thought of super glue before I used the stuff.
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
11-04-2019, 11:22 AM
|
#7
|
Junior Member
Join Date: Aug 2019
Location: Olympia
Posts: 19
|
I will get the super glue gel. I have the remover for super glue, it works great. Although gloves are always a good idea.
|
|
|
11-04-2019, 12:04 PM
|
#8
|
Senior Member
Join Date: Jan 2014
Location: Winnipeg, Canada
Posts: 1,196
|
This is what I ended doing to resolve the issue permanently:
http://www.keystoneforums.com/forums...ad.php?t=26266
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|
|
|
11-04-2019, 03:24 PM
|
#9
|
Junior Member
Join Date: Aug 2019
Location: Olympia
Posts: 19
|
Thanks Slow. I can see now what it is doing. I thought it was just to seal out the water, but it is also a stop. Not a great design as you mentioned. Since this is only 3 months old, I may wait to make the modification and use the super glue for now.
The dealer is still working through the list of things wrong, I will add this to the list. Note to self when trying the fireplace check to see if it heats and not that it makes pretty pictures...ugh
|
|
|
11-04-2019, 05:45 PM
|
#10
|
Senior Member
Join Date: Jul 2017
Location: Monroeville
Posts: 1,550
|
I have used the rubber contact cement gel successfully before, not real messy at all.
__________________
2014 Bullet Premier 29bh in Charocal
2019 Ram 2500 HD 4x4, CC, 6.4L
2011 Passport 2510RB (Sold)
|
|
|
11-06-2019, 04:16 AM
|
#11
|
Senior Member
Join Date: Aug 2012
Location: Adelaide, South Australia
Posts: 123
|
Have tried everything from silicon to STMP based sealants.
Latest has lasted 2 years & taken a battering where the wire bracket seats against the frame when the slide is in.
Attached new rubber pads (made from pipe joint rubber sheet) with a product from Soudal called 'T Rex' It boasts as one of 'the strongest adhesive on earth' & so far lives up to it. Soudal is made in Belgium & one of the Tour de France sponsours & a relatively new one in Australia.
It is a fast grab SMX Polymer adhesive.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|