Winterization via Fusion Convenience Panel

[aehjr]

Originally Posted by Fuzion342

I have a Fuzion 342 and my first time winterizing I found that the pump didn't draw suction either from the AF jug. What I found was the O ring on the Winterize Valve wasn't put in properly from factory ( it was pinched/cut). I replaced that O Ring any haven't had a single problem in the last 4 years.
Hope this helps.

The winterize hose fitting has suction but not as much as I would like. Next time I open the panel up, I will check the O ring on the winterize valve.

Thanks for the tip!