|
08-01-2011, 05:25 PM
|
#1
|
Junior Member
Join Date: Sep 2010
Location: North Carolina
Posts: 28
|
Drop Hitch
I have a husky brand weight distributing hitch. I have the ball on it adjusted as low as it can possibly go. When I hook to my F-350 the trailer is still about 2 inches to high putting more weight on the rear axle. My question is can you buy a hitch that has more drop on it. I set my trailer level in my driveway and measured the height of what it needs to be and its at 23 inches. My trailer hitch is at 25 inches and the trailer doesn't sit my truck down any at all. My truck has the factory 20 inch wheels from Ford which makes it sit up a little bit higher.
Any advice or if you have had this issue what did you do.
|
|
|
08-02-2011, 06:58 AM
|
#2
|
Senior Member
Join Date: May 2011
Location: Carnation, WA
Posts: 190
|
Try New Curt Hitch Shank
I have had this problem twice with two different TT's. Both times I found a solution here:
http://www.curtmfg.com/index.cfm?eve...&categoryid=36
If you find a Curt hitch shank that will work for you, there are many vendors that sell them.
__________________
2011 Keystone Cougar 24RKS
2007 Cadillac Escalade
Prodigy P2 Brake Controller
Past Trailer:
Forest River R-POD RP-175
Past Tow Vehicle:
2008 Toyota Sienna
|
|
|
08-02-2011, 12:38 PM
|
#3
|
Senior Member
Join Date: Mar 2011
Location: West Lebanon PA
Posts: 350
|
i have the same problem, i have a full size ram 2500, with a small lift. the hitch they gave me is anything but ideal. you can purchase a longer drop hitch and still use your existing ball mounts. i have a reese set up, and i just priced one, for about 85 bucks at a local dealer. a little advice, try to find a dealer in your area, cause they do weigh a bunch, and the little bit you save ordering it online, you will most likely pay for it in shipping. it sounds like you don't really need that much more drop, so yours could be a little bit cheapier.. good luck
Kyle
__________________
2006 Springdale 295bh TT
2004.5 Dodge Ram 2500 Diesel TV(Babe, the Blue Ox), tuned, cold air, high ram, open pipes, 6 spd., 3 inch lift, running on 35's and lovin' it
Me-26, Wife-26, Boy-4, Girl-2
Dogs
Buddy-beagle hound mix
Emily-beagle hound mix
Sadie-boarder collie (my amish one)
|
|
|
08-02-2011, 12:50 PM
|
#4
|
Junior Member
Join Date: Sep 2010
Location: North Carolina
Posts: 28
|
Kyle so most any drop hitch will work as long as its rated for to hold the weight? Is this what I'm reading into your note.
|
|
|
08-02-2011, 01:22 PM
|
#5
|
Senior Member
Join Date: May 2011
Location: Carnation, WA
Posts: 190
|
Drop Hitch Compatibility
I've assumed we are talking about a replacement "hitch shank" (what I think you are referring to as a "drop hitch"). If so, you would remove your WD hitch "head" from your existing shank and reinstall it on your new shank. You need to be sure that your "head" is compatible with the new shank. For example, what is the hole spacing and diameter on your "head", and what is the spacing and diameter on the new shank? Some shanks come with holes spaced 1.5 inches on center and others come spaced 1.25 inches on center. Some use 5/8 diameter holes and some use 1/2 diameter holes. You just need to verify compatibility before purchasing.
FYI: I believe I got one shank from an internet dealer and it came with free shipping. So you don't need to limit yourself to local stores.
__________________
2011 Keystone Cougar 24RKS
2007 Cadillac Escalade
Prodigy P2 Brake Controller
Past Trailer:
Forest River R-POD RP-175
Past Tow Vehicle:
2008 Toyota Sienna
|
|
|
08-03-2011, 04:09 PM
|
#6
|
Senior Member
Join Date: Mar 2011
Location: West Lebanon PA
Posts: 350
|
ok well put. i went to a dealer, mainly cause of the above issues with measuring, and also i didn't see any deals on-line i couldn't get at my dealer. when i say dealer, i am talking about a local company that deals with hitch's and pretty much anything that can be hooked to another vehical somehow. i guess my advice is, if you trust yourself with things like this, go for it, but sometimes things are just best left to someone who knows better then you. i specialize in construction, not hitch's. just throwing my experience out there.
also i did order a drop hitch one time, and ended up getting a a 5k one that was pretty much a waste of money, and it would have cost a bunch more to return it and get one shipped back to me.
__________________
2006 Springdale 295bh TT
2004.5 Dodge Ram 2500 Diesel TV(Babe, the Blue Ox), tuned, cold air, high ram, open pipes, 6 spd., 3 inch lift, running on 35's and lovin' it
Me-26, Wife-26, Boy-4, Girl-2
Dogs
Buddy-beagle hound mix
Emily-beagle hound mix
Sadie-boarder collie (my amish one)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|