Silverado IBC removed and replaced!
After getting fed up with my factory integrated brake controller not doing it's job and many people telling me it's the brakes on the camper I found a solution! GM was actually smart enough to install the wire pigtails for an aftermarket controller. I finally found the wires and installed a Tekonsha Prodigy P3 controller and my brake problems are solved. The factory unit would barely slow the rig at all on a setting of 10 and manually applying them. I was told that the problem is the camper, but they worked fine on my old truck with a P3 so what gives? With the P3 in the 2008 truck my brakes a real strong and with a range of 0-15 gain I ended up setting on 8.5 with boost on level 3. I feel much safer now!
__________________
2008 Silverado 3500HD 4x4 SRW Duramax Allison trans
2014 Cougar 327 RES "Campy"
|