Quote:
Originally Posted by Brantlyj
You can still get HDPE sheets at Menards. Just search hdpe. Comes right up for me. Different manufacture.
https://www.menards.com/main/buildin...89-c-14048.htm
I would also use Vulkem for the sealant. It’s pliable, water resistant, designed to adhere to a wide variety of materials and does not crack. |
Thanks for the link. That's the HDPE panel I bought. When I search the local store there's no availability (doesn't come up) but your link does show it available, at least in the warehouse. That's good news to me.
Gegrad, I used 1.25" self tapping screws. The trailer floor is 2" (plus a little) and the HDPE panel is 0.25, so by the time they thread through the panel, the 1/32 outrigger and the 1/8" frame member, there's a tad bit less than 1". Since the first 3/8" is drill point/hole maker, that leaves about 1/2" of threaded screw through the metal members.
Threaded Mode
