Good day. My stealership , well, I will not say anything about them, both good and bad. I bought me a continuity tester and a $10 volt / ohm tester from Walmart , and figured out the way the wires were going. What a dumb design. Power come into the switch, leave the switch, going out of the switch, and then TOUCH the lead for the light bulb, then go back into wall, come out, thru the bulb, then into the ground side, and repeat. The more connections there are, the more chances are of failure. Why not have the power come into the switch, then a LOCKING or a PUSH ON TAB , not touching lead, going to the light. Anyway. RANT OVER . Fixed. Thank you.