Floor registers

[Kickin It]

Im looking for 2 new floor registers for the living area and kitchen. The ones from the factory have been stepped on and are bent and edges will catch your shoes and toes in the middle of the night. I want something that is "strong like bull". Any suggestions?

[Javi]

For all intents and purposes they are mobile home registers and there isn't a lot of options available.

Do the slides run over the registers when pulled in, they do on my trailer and that can cause a problem when they get bent. I bought a dozen from Trekwood RV parts.. you will need the VIN of the trailer and they can match the OEM..

[Harleyhop]

You can get HD ones at your local plumbing & heating supply.

[brittsnbirds]

Originally Posted by Harleyhop

You can get HD ones at your local plumbing & heating supply.

They are a weird size, tried to get some but they were not standard!!

[Williston324]

There are many available on eBay and very reasonable prices.

[Harleyhop]

They should be able to special order them.

[Dave W]

I don't know what size registers you have but I just replaced two in our Montana High Country bath and bedroom with a pair with dampers and purchased for the princely sum of $6.87 each and from Lowe's. Both Lowe's and Home Depot have several sizes - the one's I bought were something like 2-1/2x10 inches. I had to take a wood rasp and clearance the hole less then an eighth inch plus drill a couple screw holes in each. They were also the right color.

[GaryWT]

Have you looked at an RV store or online at camping world?

[Kickin It]

I did find them at home depot but its the same thing as whats in there. I will see if my HVAC guy ca get some or ill just keep replacing them with the standard. Thanks For all the replys