Icemo303, Howdy;
Quote:
Originally Posted by jsmith948
You might want to check the fuses located in the black plastic box in the outside refer compartment. Are you hooked up to shore power? Do you have 120V at the plug in the outside compartment? Is your battery/converter supplying the necessary 12V to the refer control board? If all of that is good, you may have a problem with the control board. If you haven't done a forum search, you might try that. There were several posts regarding refer problems.
Good luck and please let everyone know what you find.
|
The above is a good second thought... The main thing here is there are 2 fuses
in the control module, a 3 amp and a 10 amp. the 3 amp is for the 12 vdc side
and controls the fridge. In other words no 12 vdc NO operation at all.
The control mod. is accessed from outside from the fridge vent. Look for a
small black box (mine is on the left side of the access hole), about 4" square held in place by 2 Phillips screws.
Good luck.
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.