Quote:
Originally Posted by Bushman512000
Well is the slide stuck or sticking the question is now whitch right?I would try to get under the unit and spray ever thing the slide rides on with lube like a spray grease say white lithiom or cable and chain lube with graffite....That may make a great difference if so repeat the treatment and work the slide in and out a few times.Then lube it every few weeks to keep it free from sticking.I know most people do not ever look at the under side and they should good luck Bushman
|
Good avice. (make sure everything is nice and clean/free of debris first!)
While you're at it, don't forget to condition the slide seals!
__________________
2013 Passport 3220BHWE, upgrade axles, Kumho Radial 857's, all LED, TST507 TPMS, Reese DCSC, DIY corner stabilizers
2012 Ram 1500 Sport crew cab, Hemi, 4x4, 3.92 LSD, factory brake controller, S&B CAI w/scoop, Moroso air/oil can, 87mm ported/polished/knife-edged throttle body, Magnaflow exhaust, 180* t-stat, Rear lowered 2", Airlift 1000.
|