Sliding shower door adjustment

Mike1954 · 07-31-2021, 01:15 PM

Greetings all, my triple sliding shower door has the first “inside” panel out of whack. I can push at the top of the track and it will straighten up, parallel to the wall, but won’t stay in the position that I need to get it straight. Is there an adjustment that can be made? Do I have to remove the small set screws on the handles to remove first? Or do I take the top rail off completely to make any adjustments?

wiredgeorge · 07-31-2021, 01:32 PM

Mike, someone else just asked a very similar question just recently. Use the search function or perhaps someone who has a memory will point you in the right direction. A professional tech offered a solution in that thread. Take a second and go to the UserCP and find the signature button and make and save a signature with your camper year, make and model and same for your tow vehicle; future answers will have more context.

Mike1954 · 07-31-2021, 01:41 PM

For whatever reason my signature did not post “ 2021 F-250 XLT SuperCrew
2017 Cougar X-Lite 28SGS
PullRite Superlite #2600 20k“ and my UserCP is up to date.
George, I searched the forum for all things related to shower door adjustments and nothing was specific. Thanks

wiredgeorge · 07-31-2021, 01:50 PM

Whining about signatures is my fetish... sorry. In any case, when you search, use the "advanced" function and search in all forums. I used "shower" as the search term and it was close to the top:
https://www.keystoneforums.com/forum...ghlight=shower

Not sure if the fix suggested is applicable to your issue but worth a look.... good luck and if this isn't the right answer, keep the thread going as there are folks on this forum with lots of smarts about these things...

Mike1954 · 07-31-2021, 01:56 PM

I saw that post, and it relates to a single swinging door. I have a 3-panel slider.

wiredgeorge · 07-31-2021, 02:01 PM

Quote:

Originally Posted by Mike1954

I saw that post, and it relates to a single swinging door. I have a 3-panel slider.

Well. I tried. I am sure one of our smarter folks will stumble across this thread and provide some real help. For the life of me, can't picture a 3 panel sliding door system. You might want to post pics of the issue... maybe that would help someone to provide some helpful info. Good luck!

Mike1954 · 07-31-2021, 02:03 PM

Thanks. I’ll try to take some pics and post.

**chuckster57** · 07-31-2021, 02:23 PM

If it’s the doors I’m thinking, there is an adjustment, I’ll wait for pics.

**flybouy** · 07-31-2021, 02:53 PM

Are you using an Iphone? I've read where others using them their signature won't post.

jasin1 · 07-31-2021, 03:13 PM

Quote:

Originally Posted by Mike1954

For whatever reason my signature did not post “ 2021 F-250 XLT SuperCrew
2017 Cougar X-Lite 28SGS
PullRite Superlite #2600 20k“ and my UserCP is up to date.
George, I searched the forum for all things related to shower door adjustments and nothing was specific. Thanks

Make sure to hit “save” when you enter your info

jasin1 · 07-31-2021, 03:18 PM

This was from another forum..apparently the middle door connects to one of the other doors by a spring clip? Maybe your needs to be reconnected

jasin1 · 07-31-2021, 03:29 PM

I just looked at mine. There is a screw with a graduated incline? Slot that each door looks to have to adjust the top roller…looks like the top cap needs to come off..two screws one on each side and some silicone

Sorry about the tipped over photos

Mike1954 · 07-31-2021, 04:17 PM

Jasin1, yes, you have the same door system as mine, thanks for the info. So, I need to take the top rail off to adjust?

jasin1 · 07-31-2021, 04:22 PM

Quote:

Originally Posted by Mike1954

Jasin1, yes, you have the same door system as mine, thanks for the info. So, I need to take the top rail off to adjust?

That’s the way it looks to me….unless you could lift the door off individually and try different adjustments

Mike1954 · 07-31-2021, 04:23 PM

Thank you. Appreciate the quick responses.

jasin1 · 07-31-2021, 04:23 PM

It looks like the tracks that the door ride on are separate from the top cap

jasin1 · 07-31-2021, 04:25 PM

Maybe you could get a 90 degree screwdriver or little socket in there to adjust and tighten the screw?

E Rod · 07-31-2021, 08:40 PM

I simply removed the glass panels and hardware and installed a curved shower curtain rod and new shower curtain. Now we have more elbow room and no more worries about it breaking.

Mike1954 · 08-01-2021, 07:38 AM

Tried to attach a photo? I managed to tighten the screw inside the nylon roller. Got it as tight as I could and it managed to straighten the door panel. Thanks for all the help.

Dadmech · 08-01-2021, 10:11 AM

Quote:

Originally Posted by Mike1954

Tried to attach a photo? I managed to tighten the screw inside the nylon roller. Got it as tight as I could and it managed to straighten the door panel. Thanks for all the help.

Thanks for the update Mike. I have the same doors with similar problems.

You may also like: