Bunk Bed Nets

[Dshockley]

Need to purchase some bunk bed nets or guards, any suggestions on what kind and where to get them?

[Htfiremedic]

I am considering a pool noodle under the sheet to prohibit a roll off.
I too am seeking other ideas.

[rnkburg]

I lifted the mattress and put a 1x10 and cut to fit on a piano hinge. I can flip it up, have aircraft cable attached to the bed frame so it won't go on over, mattress holds it straight up. Can fold it down when adults need top bunk or putting bed up to ceiling to use as garage . It works well , easy to do, and inexpensive

This is for the upper bed in the garage of my raptor 300mp

Sent from my EVO using Tapatalk 2

[f6bits]

I built little fences that clamp on the existing lip. What you don't see in the picture are three little "tabs" on the back side of the bottom rail that fit over the bed frame lip. One at each end and one in the middle. The tabs are made of the same 1x4 that the rails are made of.

[ThePressureIsOn]

Nice work f6bits, keep those little ones safe!

[jeffh]

I made this up with plywood and 1x8