Quote:
Originally Posted by Trukinbear
Thanks, it was indeed a push/pull without the handle.
|
If the blade rod (shaft) is still present and there is a threaded end on it, all you need to replace is the "T" part of the handle. Any RV parts counter will have them.
If the end of the blade rod appears broken off, you have a more complex situation. I looked briefly on Valterra's website and at Lasalle Bristol's, and did not see replacement shafts. From the looks of it, the blade rod is integral to the valve on the Valterras and would have to be replaced. The same would probably be true if the gate valve is remoted with a flex cable.
This current thread discusses replacing the gate valve portion of the assembly.
http://www.keystoneforums.com/forums...ad.php?t=30240 Depending on your DIY skills, it may be a job for the RV shop.
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520)
GMRS: WQPG808 (462.675 TPL 141.3)