2024 f-350 drw

[dtneisner]

I am looking at a 2024 F350 DRW as a potential new tow vehicle. I currently tow with a 2018 F250 and it appears to be the same height ground to the top of the bed rails. Been searching the web attempting to find the published bed measurements. Right now I am not happy with my bed rail clearance. M
y Curt A16 in STD rails is set up as high as it goes and pin box is in the middle setting. Looking to see if the 24 F350 DRW will be the same, better, or worse. Current 5er is a Cougar 316RLS.

[rhagfo]

EST answer is take a tape measure to your local Ford dealer and measure. Our 2016 Ram 3500 DRW 4x4 was within fractions of an inch to our 2001 Ram 2500 4x4.

[NH_Bulldog]

We have a Curt A16 on rails in our 2022 F250 and it is set at its highest setting. Our 2024 Cougar pinbox is set at the factory setting (whatever that is) and we have 6”-7” of clearance to our bed rails. At a minimum, I would say that you should be about the same. There was a redesign after 2022, but it was more cosmetic so I doubt anything structurally changed that would alter the height. As noted above, an easy solution is to just go to a Ford dealer and measure one.

[Camping family]

I had an f250 and went to the f350 I didn’t find any if all difference in the bed height.

[dtneisner]

Originally Posted by NH_Bulldog

We have a Curt A16 on rails in our 2022 F250 and it is set at its highest setting. Our 2024 Cougar pinbox is set at the factory setting (whatever that is) and we have 6”-7” of clearance to our bed rails. At a minimum, I would say that you should be about the same. There was a redesign after 2022, but it was more cosmetic so I doubt anything structurally changed that would alter the height. As noted above, an easy solution is to just go to a Ford dealer and measure one.

I would do that if there was one within 1 1/2 hrs of me. They seem to still be hard to find in my area.