My 2006 Raptor has a porch lite and two ramp lights that have the same housing and lens. Can someone tell me how to get new gaskets for the lenses?
The lenses are 8" wide and 6" tall.
This photo shows the front side of the lens.
This photo shows the rear (gasket) side of the lense.
All lenses are filling up with water, even though I silicone sealed the housing to the camper siding.
I thought that solved the issue, but the water came back...Further investigation revealed
they installed the lenses upside down so water couldn't drain (from the small slot molded
into it for draining). The other reason is two of them have gaskets that were not installed
properly, allowing water past them.
Many thanks to a great forum!
Threaded Mode
