RV News RVBusiness 2021 Top 10 RVs of the Year, plus 56 additional debuts and must-see units → ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Fifth Wheels
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 08-14-2014, 05:38 PM   #1
Chikez3
Junior Member
 
Join Date: Aug 2014
Location: BALTIMORE, MD
Posts: 2
How to replace docking lights?

I have a 2010 fuzion 322TE. One docking light is out. I can get the unit out of the body, but cannot see how to get to the bulb. Anyone else try to replace a bulb. Please share how to do this.
__________________

Chikez3 is offline   Reply With Quote
Old 08-15-2014, 04:00 PM   #2
Yosemitebob
Senior Member
 
Yosemitebob's Avatar
 
Join Date: Sep 2013
Location: Upland, CA
Posts: 425
I can only say mine have to replaced as a unit at 35.00 each.
__________________

__________________
2015 Four Winds Super C, Class C Motorhome
4 - 100w mono solar panels with MPPT40 to charge four 6v batteries with 440amp hours.
Progressive Industries HW50c surge protector
1800 / 3600 inverter with auto transfer switch,
The bosses: My wife and two Labradoddles 80 lbs each
Yosemitebob is offline   Reply With Quote
Old 08-15-2014, 05:09 PM   #3
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 19,619
On my Cougar, the docking light is a sealed unit and the "bulb" (it's LED) can't be changed out. The entire unit needs to be replaced. No idea on the cost as it's "hopefully" going to last the 50,000 hours it's advertised to last.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is online now   Reply With Quote
Old 08-15-2014, 07:24 PM   #4
sw342
Permanent User Ban
 
Join Date: Jul 2014
Location: Folsom, Ca
Posts: 204
I have 4 lights in the front of my Fuzion. One small one right above the king pin. 2 round ones on each side in the lower part of the cap, and one LED strip up high on the cap between the clearance lights.

On my Fuzion I have replaced the 2 round lights in the middle of the cap with LED's. If thats the light you are talking about you just have to remove the metal trim ring, by turning it counter clockwise. Then you can get your fingers on the glass lens and also turn that counter clockwise exposing the bulb. If its easier after you remove the trim ring you can remove the 3 screws and take the whole light assembly out of the cap and twist off the glass lens then.
sw342 is offline   Reply With Quote
Old 08-18-2014, 10:51 AM   #5
Pmedic4
Senior Member
 
Pmedic4's Avatar
 
Join Date: Mar 2013
Location: Illinois
Posts: 581
Docking light replacement

I to am looking at replacing the docking lights, as it looks like there is 8 LED 'bulbs', but only 3 work on one, and 5 on the other fixture. Then I also don't really use the docking lights, so debate about even worrying about it?
__________________
Ed & Mary

2017 Cougar 333MKS
2015 RAM 3500 HD with 6.4L

Pmedic4 is offline   Reply With Quote
Old 08-19-2014, 02:15 PM   #6
WaltBennett
Senior Member
 
WaltBennett's Avatar
 
Join Date: Apr 2013
Location: Haymarket, VA
Posts: 382
We've a kind of strip of LEDs that are supposed to help, but are pretty much useless. I use a Cree flashlight & open the power rear window if I need to.
__________________

'06 F350 Lariat turbo diesel dually, Curt 20k, Softopper, Aerosheld, coolant filter, air bags
'10 3665RE Hickory, wet bolts, Trimetric battery monitor, 4 100w panels & Morningstar TS-45, still tweeking!
WaltBennett is offline   Reply With Quote
Old 10-29-2020, 11:37 AM   #7
dpcrf450
Member
 
Join Date: Dec 2012
Location: San Jose, Ca
Posts: 36
Quote:
Originally Posted by sw342 View Post
I have 4 lights in the front of my Fuzion. One small one right above the king pin. 2 round ones on each side in the lower part of the cap, and one LED strip up high on the cap between the clearance lights.

On my Fuzion I have replaced the 2 round lights in the middle of the cap with LED's. If thats the light you are talking about you just have to remove the metal trim ring, by turning it counter clockwise. Then you can get your fingers on the glass lens and also turn that counter clockwise exposing the bulb. If its easier after you remove the trim ring you can remove the 3 screws and take the whole light assembly out of the cap and twist off the glass lens then.
Can you tell me which supplier you used for the two round replacement lights.
__________________
2013 Fuzion 342
2012 Ford F450
dpcrf450 is offline   Reply With Quote
Old 10-29-2020, 01:17 PM   #8
LHaven
Senior Member
 
LHaven's Avatar
 
Join Date: Feb 2019
Location: Wickenburg
Posts: 1,387
Quote:
Originally Posted by Chikez3 View Post
I have a 2010 fuzion 322TE. One docking light is out. I can get the unit out of the body, but cannot see how to get to the bulb. Anyone else try to replace a bulb. Please share how to do this.
Make sure you test the fixture first before discarding it. On my rig, I had exterior lights go out because mice chewed one conductor, the fixture itself was OK.
__________________

__________________
2019 Cougar 26RBSWE
2019 Ford F-250
LHaven is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 12:03 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×