Ground Control Gen III Question

[GmaPaTime]

I have the LCI Ground Control Gen III leveling system on our FW which has a 35amp Max Spade Fuse for each jack. I'd like to carry a couple spares of these fuses but can't seem to locate one anywhere in stores or online. All I can find are the normal 30 or 40 amp fuses. The fuse panel identifies that a maximum 35amp fuse is to be used. Does anyone know where to locate these?

[14george]

Do a google search

[JRTJH]

The fuses in my landing gear are 30 Amp, so mine aren't like yours.

If yours are the MAXI fuse, 35 Amp, you can get them here:
http://autoplicity.com/6141485-bussm...FRABaQodG2oA7A

If, however, they are the "standard size" (same size as the fuses in your power distribution center) then they are available here:
http://www.amazon.com/ATC-35A-Standa...ds=35+amp+fuse

Good Luck

[GmaPaTime]

Originally Posted by JRTJH

The fuses in my landing gear are 30 Amp, so mine aren't like yours.

If yours are the MAXI fuse, 35 Amp, you can get them here:
http://autoplicity.com/6141485-bussm...FRABaQodG2oA7A

If, however, they are the "standard size" (same size as the fuses in your power distribution center) then they are available here:
http://www.amazon.com/ATC-35A-Standa...ds=35+amp+fuse

Good Luck

John.... Thank you for the reference.

I thought they would be 30's also but pulled one out to verify. Our dealer didn't even have them. I looked online but guess I wasn't wording it correctly using 35 maxi vs. 35 max.

Steve

[JRTJH]

Steve,

Now you get to help me.... Since you pulled a fuse and I'm not that familiar with the leveling system (I bought a 2014 and it wasn't available), for future reference, which is it, the maxi (large fuse) or the standard size ????

Thanks

[GmaPaTime]

It's the large size John. The fuse panel is located on the basement ceiling just above the front opening. Bad spot cause you need to bend backwards looking up to see it.

You posted a comment the other day on another post that made me think to look for mine.

Steve