If you can determine which end has the tension spring, or if both have a tension spring, you just insert a pin in the end of the tube to hold the tension.
Then take the whole roller assembly off the brackets, wind it in 2 turns and then retract the slide enough to put the tube assembly back on. Release the pins and that should do it.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|