TV bracket

[dennisc]

What kind of TV bracket do I need to hold a 32" flat screen TV outside there is already a bracket piece installed from the factory

[hdrolling]

Is it a "V" style bracket or the type that has two round holes one above the other?

[ctbruce]

http://www.pawinternational.com/tv_bracket/default.html

This may help.


Sent from my SAMSUNG-SM-N910A using Tapatalk

[marksiemer]

I am also curious about this. I have the one with two holes.

[hdrolling]

Originally Posted by marksiemer

I am also curious about this. I have the one with two holes.

Is this what you need?

http://www.trekwood.com/products/448...For-KRV-309694

[marksiemer]

Originally Posted by hdrolling

Is this what you need?

http://www.trekwood.com/products/448...For-KRV-309694

This is what it looks like on the oustide. I need the male bracket to connect to a TV.

[canesfan]

Originally Posted by hdrolling

Is this what you need?

http://www.trekwood.com/products/448...For-KRV-309694

I think that's what he HAS. I think he needs the other side that attaches to the TV.

There was a thread about this bracket a few years ago and I found some info from looking at mine. I'll see if I can find the thread.

[ctbruce]

Dennisc and marksiemer: post pics of what you have will help.

Sent from my SAMSUNG-SM-N910A using Tapatalk

[marksiemer]

This is what it looks like on the outside, but I need to bracket that connects to the TV so it can slide into.

[marksiemer]

Originally Posted by ctbruce

Dennisc and marksiemer: post pics of what you have will help.

Sent from my SAMSUNG-SM-N910A using Tapatalk

This is the bracket connected to the outside of the trailer, I need the male bracket that connects to the TV.

[dennisc]

That's the same bracket 2 holes

[dennisc]

That's the same 2 hole bracket I need the 1 that matches up to that 1 goes on the back of the TV

[dennisc]

That's the same bracket I need the piece that goes on the TV

[PARAPTOR]

Originally Posted by dennisc

That's the same bracket I need the piece that goes on the TV

Can not see really good from picture of the reference that canesfan provided you in a previous post but looks like one that will work. I would assume if that bracket is on your rig from the factory, one of your inside TVs has the bracket that fits into there so an inside TV can be moved outside

[dennisc]

I'm looking to purchase a bracket to use outside so I can leave the TV inside if you know where I can purchase the piece that attaches to the TV I want to use outside

[canesfan]

Read posts 18 and 15 http://www.keystoneforums.com/forums...t=27969&page=2

[canesfan]

Did you see my post above ^^^

[marksiemer]

Originally Posted by canesfan

Did you see my post above ^^^

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e

[hdrolling]

Originally Posted by marksiemer

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e

Don't worry, we got ya. I wasn't sure if you needed the mount or the part that connects to the mount. Here is everything you should need.

https://shop.ramco-eng.com/collections/moview-mounts

[hdrolling]

Originally Posted by marksiemer

Yes I did see your post. My problem is, the trailer i purchased did not come with a TV. So basically I have a blank wall in the trailer. I was hoping someone knew what I should purchase to mount the tv inside and be able to utilize the bracket on the outside too. Does this make sense? Hopefully i explained it right.:e

It will depend on what size TV you want, and if you want the TV flush or to be able to swivel and extend out?