Quote:
Originally Posted by W7PSK
Well I know the Moryde wont fit, the dealer did a test fit with their tool and it wont fit my 2008 Everest.
I see that that Lippert has come out with the Solid Step and it looks a bit different.
I wondered if any Everest Owners has tried it yet?
Thanks
|
I just installed a set of Lippert Quad Solid Steps with their side hand rail and their Lift Assist.
My door frame was 28.5" wide which put me in their narrow steps. They only make two, a narrow and a wide. The narrow has 20" wide treads and I believe the wide has 24" wide treads.
I had to do a bit of side shifting to the right/forward of the RV to get the retaining latch to catch the door frame and that put me at around 3" from the left side. They recommend 2-5/8" from the left side. I still had plenty of room for the lift assist lever to fit inside the inner mounting wall cover.
Looking at my setup now, I have 4" to the right I "could" have used the wide to fit my door, but the narrow is tons better than the other factory steps. And with the lift assist, it's a breeze to put in and out. One finger as mentioned in the videos etc.
Follow the Lippert sizing chart and you should be able to find a fit for your door, unless your door is super narrow.
Good luck! Have a great week...