|
06-07-2014, 09:55 AM
|
#1
|
Member
Join Date: Oct 2013
Location: Austin, Texas
Posts: 97
|
Torque wrench for $9.99 at HFT
I purchased this torque wrench at Harbor Freight Tools for $19.99 a while back to check the torque on my trailer's lug nuts before every trip. I thought it was a reasonable price then but this torque wrench is now on sale for $9.99 and is worth considering if you don't have one.
It has a 1/2 inch drive and I keep it in its hard plastic case in my Travel Trailer toolbox. Haven't had an issue with it and found a few loose nuts.
__________________
J&A
In search of my next RV
SOLD! - 2013 Terrain 299TBH
SOLD! - 2002 Chevy Tahoe 5.3L
|
|
|
06-07-2014, 11:22 AM
|
#2
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
Thanks for posting, 2 reasons, I have had one about 2 years now, works great, good price. Also, I forgot to recheck the lugs after pulling wheels off and drove about 25 miles to/back from camp trip last week. So I went out and checked the trailer. I found 3 out of 24 lugs needed alittle more tighting. Sad story I finally got one after a coworker lost a wheel and cost about 4800 in fix/repairs and 2 days at the repair place. He used a star wrench as I used to before that story.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
06-07-2014, 11:27 AM
|
#3
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,456
|
Yep, got one just like it...
|
|
|
06-07-2014, 11:33 AM
|
#4
|
Senior Member
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
|
Decent wrench. I just used mine today. One or two nuts on each wheel needed a bit of tightening. Totally worth the $20. At $10, now there's no excuse to not have one.
__________________
-Scott, DW, DG, DB, and DD
2011 Passport 2590BH
2009 Ford F150 SuperCrew F X4 5.4L w/Max Tow
|
|
|
06-07-2014, 12:50 PM
|
#5
|
Senior Member
Join Date: Jan 2011
Location: Austin, Tx
Posts: 1,910
|
At $20 there's no reason not to have one.
__________________
2011 Outback 277RL
2013 F250 XLT Crew Cab 6.2L
Bitter Gun Owner
Bitter Clinger
Armed Infidel
|
|
|
06-07-2014, 02:33 PM
|
#6
|
Senior Member
Join Date: Aug 2011
Location: Spokane, Washington
Posts: 368
|
I am a happy owner also. Hot Rod magazine a while back did a test story on torque wrenchs in 1/2" drive and yes HFT came in first place over all the big names. Makes me a happy camper.
|
|
|
06-07-2014, 06:06 PM
|
#7
|
Member
Join Date: Mar 2014
Location: Fraser, Michigan
Posts: 93
|
Just remember to store it while it's turned to 0. Other wise it can lose calibration by settling the springs.
Sent from my SM-G900T using Tapatalk
|
|
|
06-07-2014, 06:25 PM
|
#8
|
Member
Join Date: Mar 2013
Location: Belvidere, IL
Posts: 36
|
I have an older HF 1/2 drive torque wrench that you can calibrate. And a newer 3/8 drive that cannot be calibrated. I checked the calibration at work of the new 3/8 drive and here are the results.
In foot pounds
Set point Actual
25. 15
50. 42
75. 69
Not sure if the newer half inch drives can be calabrated like the older ones or not. If they are they have an allen screw down on the side by the handle. Not the most accurate but knowing the real values I can compensate. The 1/2 drive I calibrated correctly. If you can torque wrenches should be calibrated annually.
__________________
2012 Laredo 294RKS
2006 Chevy Silverado 2500 HD Duramax Crew Cab LB
Equal-I-Zer 14K
|
|
|
06-07-2014, 06:59 PM
|
#9
|
Senior Member
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
|
The Harbor Freight seems to have 10 as its lowest setting, so that's where I leave it.
Fixjet, thanks for the calibration tip. I'll have to check mine.
__________________
-Scott, DW, DG, DB, and DD
2011 Passport 2590BH
2009 Ford F150 SuperCrew F X4 5.4L w/Max Tow
|
|
|
06-08-2014, 11:35 AM
|
#10
|
Member
Join Date: Jun 2013
Location: Oregon
Posts: 78
|
Just bought one two weeks ago at HF. We purchased a new Ram and had a B&W Companion hitch installed. it has a single bolt that holds the hitch and when reinstalling it, it has to be tightened to 80 lbs/ft. I thought it would get used maybe twice a year as I leave the hitch in most of the time. So while I don't mind spending money for a decent tool I wasn't looking forward to the $70+ I was seeing at other stores. Now I realize I can also use it to check the lugs which I should be doing regularly. Question: how do I know what the right setting is for lugs?
__________________
Patrick
Central Oregon
2014 Cougar 327RES
2014 Ram 3500
B&W Companion Hitch
|
|
|
06-08-2014, 12:39 PM
|
#11
|
Senior Member
Join Date: Jun 2013
Location: oxnard ca
Posts: 182
|
So, I went HFT this morning and purchased the Torque wrench, works fine. I do have one question. In reading Keystone owners manual it reads to torque lug nuts to 110-120 on all units except for Cambridge, which requires 140-150 ft/lbs. I don't claim to be a mechanic but I do know how to use a torque wrench. Maybe there is one of you out there that can explain to me what is meant by Cambridge.
__________________
John
Now Retired (At Last) Long Time Coming
Soon to be retired after 41 years with DOD
2006 Duramax Silverado 2500HD
2013 327 RES Cougar
|
|
|
06-08-2014, 02:00 PM
|
#12
|
Member
Join Date: Oct 2013
Location: Austin, Texas
Posts: 97
|
Quote:
Originally Posted by Povo
Just bought one two weeks ago at HF. We purchased a new Ram and had a B&W Companion hitch installed. it has a single bolt that holds the hitch and when reinstalling it, it has to be tightened to 80 lbs/ft. I thought it would get used maybe twice a year as I leave the hitch in most of the time. So while I don't mind spending money for a decent tool I wasn't looking forward to the $70+ I was seeing at other stores. Now I realize I can also use it to check the lugs which I should be doing regularly. Question: how do I know what the right setting is for lugs?
|
Povo,
You can do a "torque" search in this forum or at the Keystone site and find the correct torque settings documentation (tutorials, videos,etc.) for your wheels' lug nuts.
Regards,
__________________
J&A
In search of my next RV
SOLD! - 2013 Terrain 299TBH
SOLD! - 2002 Chevy Tahoe 5.3L
|
|
|
06-08-2014, 05:12 PM
|
#13
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,836
|
Quote:
Originally Posted by homer3
So, I went HFT this morning and purchased the Torque wrench, works fine. I do have one question. In reading Keystone owners manual it reads to torque lug nuts to 110-120 on all units except for Cambridge, which requires 140-150 ft/lbs. I don't claim to be a mechanic but I do know how to use a torque wrench. Maybe there is one of you out there that can explain to me what is meant by Cambridge.
|
The Cambridge is a model in the Keystone line of RV's... The reason the torque is different on the Cambridge is because it has a different size lug. It's explained in great detail in your owner's manual. The torqueing of wheels is a 3 step process IF the wheels have been removed. It is a 1 step process if you are rechecking the wheels which have been previously torqued per the instructions.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
06-09-2014, 06:05 AM
|
#14
|
Member
Join Date: May 2014
Location: Ashland, Virginia
Posts: 46
|
I had also picked one of these torque wrenches up at HF. I also picked up a socket set for all the common lug sizes. Now I can do my 5er, utility trailer, TV and help anyone else that might need one.
__________________
2015 Montana 3721 RL
2015 Ram 3500 6.7 Cummins Dually
Previous: 2014 Cougar 327 RES High Country
2014 Ram 2500 HD 6.7L Cummins, 2002 Coleman Popup, 2012 Wildwood 24RB, 2014 Outback 298RE
|
|
|
06-11-2014, 05:27 PM
|
#15
|
Senior Member
Join Date: Feb 2013
Location: Erie, PA
Posts: 441
|
Quote:
Originally Posted by Hercules1978
Just remember to store it while it's turned to 0. Other wise it can lose calibration by settling the springs.
Sent from my SM-G900T using Tapatalk
|
Or the lowest setting. My Kobalt starts at 50 ft lbs and it says to store there.
__________________
2007 Silverado 2500HD 4X4
2013 Springdale 303BHSSR
|
|
|
06-12-2014, 02:20 PM
|
#16
|
Senior Member
Join Date: May 2012
Location: southern indiana
Posts: 292
|
I see 21.99 on sale here
|
|
|
06-13-2014, 03:42 PM
|
#17
|
Member
Join Date: Oct 2013
Location: Austin, Texas
Posts: 97
|
Quote:
Originally Posted by rode2nowhere
I see 21.99 on sale here
|
Yes, it was a weekend deal only. Still, for $22 you can't go wrong. I wouldn't wait. I signed up to their distribution list to get coupons and notifications. That's how I found out.
__________________
J&A
In search of my next RV
SOLD! - 2013 Terrain 299TBH
SOLD! - 2002 Chevy Tahoe 5.3L
|
|
|
06-15-2014, 02:11 PM
|
#18
|
Senior Member
Join Date: May 2012
Location: southern indiana
Posts: 292
|
I will do the same maybe they will have it on sale again
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|