|
07-28-2020, 03:38 PM
|
#1
|
Member
Join Date: Jun 2018
Location: Fall River
Posts: 55
|
Plugged in New Furrion Observation Camera - Nothing Happened...
I have a 2018 Passport GT 2670BH. Just bought a new Furrion S Observation Camera. Plugged it into the adapter on the display for power to pair - all works great.
Installed it on the trailer on the premount - good connection on the electrical connector - and no power. Hooked up the power from truck to the trailer, tried with clearance lights on, assuming it was powered from those - still nothing. Manual for trailer just says "follow camera's mfgr instructions for install. Not very helpful.
Anyone with a 2018 Passport GT that has a camera that could enlighten me on this? Is there a dedicated run from the power center on an unused DC fuse spot that runs the camera? Switch somewhere I haven't found yet? Appreciate any help - hoping to use it on a trip this coming Sun without having to take the trailer apart to find what it's hooked up to...
Tnx!
-Steve
__________________
Stephen and Yolaine
2018 F-150 King Ranch SCrew (3.5 EB, Max Tow)
2018 Passport GT 2670BH (Using Equalizer 4 Pt)
Nova Scotia, Canada
|
|
|
07-28-2020, 03:50 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,349
|
Since the power comes from the center clearance light, I would check the camera wiring. Not uncommon for the camera wires to be reversed.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
07-28-2020, 07:10 PM
|
#3
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
Quote:
Originally Posted by chuckster57
Since the power comes from the center clearance light, I would check the camera wiring. Not uncommon for the camera wires to be reversed.
|
Yup, that’s what happened with mine. The light is specific for polarity but the camera is.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
07-28-2020, 07:14 PM
|
#4
|
Senior Member
Join Date: May 2015
Location: Rockett, TX
Posts: 481
|
My camera power was not connected to the lights, it is on any time the battery disconnect is closed. Is your battery disconnect closed (on)?
__________________
Jerry & Debbie
with Fur Babies Sasha & Sam
2018 Alpine 3401RS
2019 Ford F350 SRW
|
|
|
07-29-2020, 01:31 AM
|
#5
|
Member
Join Date: Jun 2018
Location: Fall River
Posts: 55
|
My trailer has no battery disconnect, so power is always on. Looks like I’ll need to pull the center marker light and see what’s attached to the wiring.
__________________
Stephen and Yolaine
2018 F-150 King Ranch SCrew (3.5 EB, Max Tow)
2018 Passport GT 2670BH (Using Equalizer 4 Pt)
Nova Scotia, Canada
|
|
|
07-29-2020, 06:40 AM
|
#6
|
Senior Member
Join Date: Jul 2014
Location: Hemlock
Posts: 816
|
Quote:
Originally Posted by SteveW2993
My trailer has no battery disconnect, so power is always on. Looks like I’ll need to pull the center marker light and see what’s attached to the wiring.
|
Just pull the camera and swap the wires.
__________________
R.J. and Ginger
2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
|
|
|
07-29-2020, 09:30 AM
|
#7
|
Senior Member
Join Date: Sep 2018
Location: Micky Town
Posts: 241
|
This may, or may not, help.
I ran into this recently on my new Cyclone. Couldn't figure it out. Turns out, it is wired direct to the fuse block near the battery. It has its own red inline fuse. Fuse looked good, but was indeed bad. Replaced with a new one and all is well.
Worth a try anyway.
Or check power at the cam on the trailer and go from there.
Troy
__________________
2022 Coachmen 339DS DP-don’t kick me out!
2018 Keystone Limited 3551FWMLS...Gone.
2020 Heartland 4270 Cyclone…Gone
2018 F350 CC 6.7 PSD drw…Gone.
2021 F350 CC 6.7 PSD drw Platinum…Gone
|
|
|
07-29-2020, 10:10 AM
|
#8
|
Senior Member
Join Date: Mar 2019
Location: Milwaukie, OR
Posts: 1,398
|
I would pull the light and put a meter on the wires to check for power and polarity
__________________
Jeff & Sandi (and Teddy - 7lb Schnorkie)
2018 Montana High Country 305RL
2015 RAM 3500 Crew Cab 4x4 DRW
Demco Recon Hitch on RAM Puck Ball
|
|
|
07-29-2020, 10:22 AM
|
#9
|
Member
Join Date: Jun 2018
Location: Fall River
Posts: 55
|
“ I ran into this recently on my new Cyclone. Couldn't figure it out. Turns out, it is wired direct to the fuse block near the battery. It has its own red inline fuse. Fuse looked good, but was indeed bad. Replaced with a new one and all is well.”
I do have a red in-line fuse near the battery that I have no idea what it’s for. I’ll check that. Tnx.
I wish I had a spare 2.5 mm plug like what’s on the camera to put on the female end on the trailer so I could see if it has any power at all... no way the probes on my fluke meter are getting in there....
__________________
Stephen and Yolaine
2018 F-150 King Ranch SCrew (3.5 EB, Max Tow)
2018 Passport GT 2670BH (Using Equalizer 4 Pt)
Nova Scotia, Canada
|
|
|
07-29-2020, 10:45 AM
|
#10
|
Senior Member
Join Date: Sep 2018
Location: Micky Town
Posts: 241
|
Make sure to check that fuse with a meter, or replace. Mine visually looked fine.
Troy
__________________
2022 Coachmen 339DS DP-don’t kick me out!
2018 Keystone Limited 3551FWMLS...Gone.
2020 Heartland 4270 Cyclone…Gone
2018 F350 CC 6.7 PSD drw…Gone.
2021 F350 CC 6.7 PSD drw Platinum…Gone
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|