If new it may still have air in the lines, reservoir may low on fluid or system may need calibrated.
If air in lines operating them will eventually work it out.
If low on fluid, be sure all hydraulic slides/jacks are retracted before adding fluid, fluid should be 1/4-1/2" from the fill opening. If all hydraulic items are not retracted before filling expect a big oily mess next time they are.
To calibrate use manual mode & check a level on several surfaces til it's levelled to your liking then follow the calibration instructions found in your manual or online for your leveling system. Once calibrated it should be to your liking every time you hit auto level.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|