|
Hi all. I'm in the "process" of shortening the length of the large slide and also overall length of our Cougar HC 299RKS. I've made some rollers to install when returning slide into it's normal position. I wonder if anyone is looking at their cable system if they could give me an estimate of the side to slide clearance. In the case of our Cougar, it is the clearance between the roller at the bottom of the metal wall housing and the slide wall aluminum 'runner' (near the bottom outside cable). Before removing the slide I had about 3/16" on one side and none on the other. Cannot find any reference in manuals. Thanks
|
Linear Mode
