This may be a problem with the excess flow restriction built in to the system. That may not be the proper term. Regardless, if, when you fill a tank, and then re-install it and turn the valve on too fast, or if there has been a rapid leak, the system will only allow a small amount of gas to flow, which would cause what you are experiencing. The resolution to this would be, turn off the valves on both tanks, disconnect the hoses from both tanks to relieve pressure in both lines, then reconnect the lines, and finally, SLOWLY open one valve at a time. Now you will have full flow capacity in your propane system and both your HWH and your oven should work together.
__________________
Bob & Becky
2012 3402 Montana
2012 Chevy 2500HD D/A CC
|