Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Towing
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 06-01-2020, 07:49 PM   #1
ccastillo2305
Junior Member
 
Join Date: Oct 2019
Location: Houston
Posts: 28
Weight vs level

So curious question. I've read many post on weight and level rise. My question is what's more important. Getting close to if not same weight back on front axles or just close if not equal height from original stance? I ask because my current set up has me 100 pound lighter upfront but sitting the same height as unhitched. Before getting that close i was 250 lbs off but only 1/2 of an inch off regular height . i cant comprehend this. New shocks all around so i know it's not the tv.
ccastillo2305 is offline   Reply With Quote
Old 06-01-2020, 09:28 PM   #2
LHaven
Senior Member
 
LHaven's Avatar
 
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,270
This is about tuning a weight-distributing hitch, right?

The instructions I've seen say to measure the front height with passengers, hitch up, measure again, then crank the WD adjustment to bring it back half the difference.

I suppose if an actual weight scale indicated a different distribution, I'd consider that, too.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
LHaven is offline   Reply With Quote
Old 06-01-2020, 09:36 PM   #3
ccastillo2305
Junior Member
 
Join Date: Oct 2019
Location: Houston
Posts: 28
Quote:
Originally Posted by LHaven View Post
This is about tuning a weight-distributing hitch, right?

The instructions I've seen say to measure the front height with passengers, hitch up, measure again, then crank the WD adjustment to bring it back half the difference.

I suppose if an actual weight scale indicated a different distribution, I'd consider that, too.
That's exactly what i am getting to. I have done what the hitch manual says and within their instructions i was gravy, But when going to the weights i was for what i think too off on weight.
ccastillo2305 is offline   Reply With Quote
Old 06-02-2020, 02:42 AM   #4
LHaven
Senior Member
 
LHaven's Avatar
 
Join Date: Feb 2019
Location: Wickenburg
Posts: 3,270
Your goal isn't to get the weights on the axles even. It's to get the weights on the axles safely within their individual weight rating, and not have the front axle too light, so that you can retain your steering.
__________________
2019 Cougar 26RBSWE
2019 Ford F-250
LHaven is offline   Reply With Quote
Old 06-02-2020, 03:54 AM   #5
Frank G
Senior Member
 
Frank G's Avatar
 
Join Date: Feb 2017
Location: Dade City
Posts: 1,039
Knowing your TV and trailer would help. Shocks, new or old have nothing to do with load carrying or level. Your weight distributing hitch, properly installed, transfers hitch weight to the front axle of the TV and rearward to the trailer axles. In most hook-up's getting within 100 lbs. on the front axle would be acceptable, again, it is relative to your TV and trailer combination.
__________________
2021 Surveyor Legend 19rble
2017 Laredo 325RL
Travelers Rest Resort
www.travelersrestresort.com
Frank G is offline   Reply With Quote
Old 06-02-2020, 05:19 AM   #6
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,836
As previously stated, "Tuning in" the hitch must include not only "ride height" of the front axle, but also maximum weight ratings for the front axle, rear axle, receiver, hitch and trailer GVWR.

It's pretty much "your choice" which you do first, weigh the rig or adjust the "ride height" (although I'd weigh first), but both should be confirmed before "setting off with the belief that everything is A-OK" Things are not "A-OK" if your tow vehicle is sitting level, but the receiver is rated at 1000 pounds and your trailer tongue is 1300 pounds just as it's not "A-OK" if your FAWR is 3850 and you've adjusted the hitch to cause the truck to sit level, but the front axle weighs 4200 pounds when you park it on the scale. Everything, not just payload or truck GVW or rig GCWR should be within the limits.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 06-02-2020, 07:12 AM   #7
ccastillo2305
Junior Member
 
Join Date: Oct 2019
Location: Houston
Posts: 28
Thanks all. I am all new to this and anything towards a safer ride is what I am shooting for. My set up handles well and have not had any issues and actually quite happy with this hitch. I was just more curious if there was a a golden rule i guess on which to pay more attention too, I know both are important but which to fine tune more. I sit well within all my weight limits all around. But its for future vehicles and set ups. Thanks again for all the input.
__________________
2016 Springdale 270BHWE
2012 Ford Expedition EL
ccastillo2305 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 02:51 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.