Quote:
Originally Posted by MelissaW
Bill,
I do understand about the wiring. The problem is I have the connector wire that I’m supposed to splice in but it is my understanding that the green/ white would be ready with wire caps so I could splice easy.
My wire has no end.. it’s just a loop that drops out of the ceiling hole.
|
You'll have to cut the grn/wht, then splice in the router wires with the wire caps. Essentially you'll have three stripped ends for both positive and negative wires. Connect both greens to the positive wire on the router, and then connect both white wires to the negative wire on the router.
Both greens together with the positive router wire. And both whites together with the negative router wire.