|
05-25-2015, 05:48 PM
|
#1
|
Member
Join Date: Jan 2015
Location: Oregon
Posts: 44
|
Hitch/Shank hitting the ground
We bought our 2015 hideout earlier this year. I thought it rather odd that the A frame was welded on the bottom of the frame which puts the coupler closer to the ground. To couple and keep it level I had to purchase a drop shank(my truck is stock suspension, no lift). Once coupled the weight distribution hitch head is very close to the ground and there's been a couple of instances when towing where the shank actually scraped on the ground. But there's just no other position for the hitch head that will keep the trailer level. Anyone else have this issue on a hideout? The springdales are essentially the same thing. I wonder why they weld that A frame under the trailer frame like that? I'm ready to sell this thing as a result as it's just unsafe.
|
|
|
05-25-2015, 09:31 PM
|
#2
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
Let us know what tow vehicle you have. Maybe a photo of the 2 vehicles hooked up with the system your using. Is it hitting on the roadways when driving or when going up say a steep driveway. A easy guess is your TV is just to low at the rear bumper.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
05-26-2015, 03:10 AM
|
#3
|
Senior Member
Join Date: Feb 2013
Location: MA
Posts: 3,153
|
I think a lot of trailers have a similar build, I know my Premier is that way but I did not have to change my hitch.
__________________
2013 Premier 31BHPR
2014 F350 6.2L
Soon to be just DW and I
|
|
|
05-26-2015, 06:51 AM
|
#4
|
Member
Join Date: Jan 2015
Location: Oregon
Posts: 44
|
I do not have any pictures of it hitched up. Here's what the coupler height is like on the trailer. Keep in mind this is with the trailer level but not parallel with the ground. My driveway has a slight slope. So to make it parallel it would need to come down several inches. You can imagine how low the hitch head would be with the entire assembly under that. To the top of the coupler from the ground is about 16".
The trailer is a Hideout 24BHWE. My truck is a Nissan Titan. It's height is similar to any other truck. We are considering upgrading to a cougar 26DBHWE. The hitch style on that is the same however the entire trailer sits higher so I don't think it would be an issue.
|
|
|
05-26-2015, 07:56 AM
|
#5
|
Member
Join Date: Mar 2014
Location: N/A
Posts: 41
|
That's exactly like my 323BH hitch looks like... And I'm pretty sure that's how the frame comes out too...
What's your tongue weight and what is your truck rated for? Is the truck returning to level when you put the weight distribution on?
Sorry, not the greatest shot of hitch/frame, but all I have right now. If you'd like I can get you a better one tonight. My yard also slopes a lot, trailer is level in this picture...
|
|
|
05-26-2015, 08:06 AM
|
#6
|
Member
Join Date: Jan 2015
Location: Oregon
Posts: 44
|
Different models have larger tires and wheels and suspensions that allow them to sit higher even with the frame like that. Just seems I have a low model. I have plenty of room before I hit the weight limits of the truck. Tongue weight loaded is around 600 lbs and I can go up to 920lbs. With WD the height is right in between hitched and unhitched which is exactly where equalizer said it should be.
|
|
|
05-26-2015, 08:19 AM
|
#7
|
Senior Member
Join Date: Feb 2013
Location: MA
Posts: 3,153
|
How many steps do you have at the door, 2 or 3? We had a 2 step trailer that sat low. We had to run it on boards to get in and out of the driveway. There were 3 or 4 places that would hit the ground without the boards. After 2 years I upgraded to something with some height. The Premier has 3 steps and could actually use a 4th as we have to put something on the ground so we can get to the first step. Some trailers are just low.
__________________
2013 Premier 31BHPR
2014 F350 6.2L
Soon to be just DW and I
|
|
|
05-26-2015, 09:37 AM
|
#8
|
Member
Join Date: Jan 2015
Location: Oregon
Posts: 44
|
Quote:
Originally Posted by GaryWT
How many steps do you have at the door, 2 or 3? We had a 2 step trailer that sat low. We had to run it on boards to get in and out of the driveway. There were 3 or 4 places that would hit the ground without the boards. After 2 years I upgraded to something with some height. The Premier has 3 steps and could actually use a 4th as we have to put something on the ground so we can get to the first step. Some trailers are just low.
|
2 steps. Sometimes at home if I need to get in it I don't even pull the steps out. Just put one foot up and grab the side and pull myself in.
|
|
|
05-26-2015, 09:43 AM
|
#9
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,664
|
I think you just have a low trailer. We are similar to GaryWT; 3 steps and use a 4"-5" platform to get to the first step.
|
|
|
05-26-2015, 09:52 AM
|
#10
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,978
|
If I remember correctly, the 24BH sits significantly lower then the 24BHS. I believe the BHS axles sit below the springs and the BH axles sit above the springs. If that's correct, you can gain about 3" of trailer height by reversing the axles so they ride under the springs.
You might want to do a quick check to see just where your axles are mounted. I just can't remember the last time I was under a non-slide Hideout.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
05-26-2015, 11:28 AM
|
#11
|
Senior Member
Join Date: Feb 2013
Location: MA
Posts: 3,153
|
No slide and shallow slide trailers are lower and can cause these issues. Like I said, after 2 years we traded it to get something higher. Old trailer had 5.5 inches of clearance in some locations, current trailer has at least 12 inches of clearance. Thought about flipping the axles but in the end our upgrade is a better trailer.
__________________
2013 Premier 31BHPR
2014 F350 6.2L
Soon to be just DW and I
|
|
|
05-26-2015, 08:23 AM
|
#12
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,664
|
From what I can tell our '14 Cougar High Country 319rls has a frame similar to yours, but, it looks like ours sits a LOT higher than yours. Where we are at now, sitting level on a level lot, the top of my hitch is at 23 1/2". If it were on a slope like your picture it might be close to 30". Yours seems pretty low.
|
|
|
|
Thread Tools |
|
Display Modes |
Hybrid Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|