|
|
06-03-2013, 09:29 PM
|
#21
|
Senior Member
Join Date: Sep 2012
Location: Airdrie, Alberta
Posts: 552
|
Joining multiple hose sections
We have a 15' hose (dealer supplied).
If we needed more to make the run, how do multiple hoses fit together??
__________________
2013 Passport 3220BHWE, upgrade axles, Kumho Radial 857's, all LED, TST507 TPMS, Reese DCSC, DIY corner stabilizers
2012 Ram 1500 Sport crew cab, Hemi, 4x4, 3.92 LSD, factory brake controller, S&B CAI w/scoop, Moroso air/oil can, 87mm ported/polished/knife-edged throttle body, Magnaflow exhaust, 180* t-stat, Rear lowered 2", Airlift 1000.
|
|
|
06-04-2013, 03:41 AM
|
#22
|
Junior Member
Join Date: May 2013
Location: texas
Posts: 13
|
Hose coupler
You can buy a hose coupler . It works great to connect 2 hoses together.
|
|
|
06-04-2013, 03:53 AM
|
#23
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by audio1der
We have a 15' hose (dealer supplied).
If we needed more to make the run, how do multiple hoses fit together??
|
Take the male end of one hose and put it in female end of other hose, twist to lock...
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
06-04-2013, 04:05 AM
|
#24
|
Senior Member
Join Date: Jan 2011
Location: Austin, Tx
Posts: 1,910
|
Quote:
Originally Posted by SAABDOCTOR
I will be the second of many! you can also buy a Camco tube at any rv store it has mounting ears on it so you can attach it to the under carrage. the hose and your rear bumper will thank you There are many other alternitives to storing the poo pipe. enjoy the new TT.
|
I looked on Camco's site for the tube and didn't see it. Do you have a link to one?
__________________
2011 Outback 277RL
2013 F250 XLT Crew Cab 6.2L
Bitter Gun Owner
Bitter Clinger
Armed Infidel
|
|
|
06-04-2013, 04:15 AM
|
#25
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Quote:
Originally Posted by Bob Landry
I looked on Camco's site for the tube and didn't see it. Do you have a link to one?
|
Pretty sure this is what he's talking about..
http://www.campingworld.com/shopping...e-carrier/1405
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
06-04-2013, 05:20 AM
|
#26
|
Junior Member
Join Date: May 2013
Location: Buffalo,NY
Posts: 10
|
^^^ that link is to a hose storage tube. Not what Audio1der is looking for.
I would suggest something like this so you can see when the tank is empty. This is the bayonet type. If your hose has this type of ends then this will work to connect 2 hoses.
http://www.campingworld.com/shopping...net-lugs/22172
The original post was about storage tubes and the above link pertains to that. I am going to try to line the rear bumper with some material to limit rubbing damage. maybe something as simple as gorilla tape on bottom and sides. That way the rust will be a non factor.
__________________
2013 Passport Elite 23RB pulled by a 2016 GMC Sierra 2500hd.
|
|
|
06-04-2013, 06:51 AM
|
#27
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,995
|
Quote:
Originally Posted by djzolin
^^^ that link is to a hose storage tube. Not what Audio1der is looking for.
I would suggest something like this so you can see when the tank is empty. This is the bayonet type. If your hose has this type of ends then this will work to connect 2 hoses.
http://www.campingworld.com/shopping...net-lugs/22172
The original post was about storage tubes and the above link pertains to that. I am going to try to line the rear bumper with some material to limit rubbing damage. maybe something as simple as gorilla tape on bottom and sides. That way the rust will be a non factor.
|
Bob Landry was asking for a link to the storage tube. Javi provided the link requested.
Bob,
Here are links to both of the Valterra storage tubes on Amazon.com. If you're a Prime member, shipping is free.
http://www.amazon.com/Valterra-A04-0...r+hose+storage
http://www.amazon.com/Valterra-A04-0...r+hose+storage
If you're not familiar with shopping at Amazon, at or near the bottom of the picture, there is a box you can click. It says something like, "10 new from" and gives a lower price than advertised. Clicking that link will take you to an Amazon webpage where all the "Amazon approved vendors" are listed. For example, on the $48 tube, there are links to buy it for as little as $40. Watch though, sometimes shipping makes it more expensive than buying from Amazon.
Hope this helps.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
06-04-2013, 08:44 AM
|
#28
|
Senior Member
Join Date: Nov 2012
Location: Prince George Va
Posts: 1,300
|
Our Raptor has a small storage compartment in the lower left front corner that has a wire bottom floor so its kinda like its outside
__________________
2008 F350 chipped and bagged 6.4 power stroke crew cab 4x4.2013 384pk Raptor (Gravy Train) 2006 Fatboy w/18inch ape hangers,2006 883c sporty,Army wife Kim,Cocoa (The Boarder Collie) and Rebel (The English Bulldog) (THE RICH RAGE WAR,BUT ITS THE POOR THAT DIE)
|
|
|
06-06-2013, 09:20 PM
|
#29
|
Senior Member
Join Date: May 2012
Location: Bremerton, Wa
Posts: 136
|
I made one from a 98 inch x 4 3/4 x 4 3/4 inch fence post. I used piece of gutter to slide inside of it. This way you can pull the hose out.
I used dowel rods for handles and to make two separate compartments. One compartment for the short hose and one compartment for the long hose.
__________________
Mike, The wife, 2 little ones and 2 dogs.
2017 Silverado 3500HD 6.0 36,500 miles
2012 Passport 3220 BHWE
2000 Trans Am WS6 11 seconds of 1/4 mile goodness.
The rest of the cars don't matter.
|
|
|
06-07-2013, 03:01 AM
|
#30
|
Senior Member
Join Date: Jun 2013
Location: near Lake Geneva, WI
Posts: 227
|
Quote:
Originally Posted by ls1mike
I made one from a 98 inch x 4 3/4 x 4 3/4 inch fence post. I used piece of gutter to slide inside of it. This way you can pull the hose out.
I used dowel rods for handles and to make two separate compartments. One compartment for the short hose and one compartment for the long hose.
|
This is what I have done as well. The hardest part was drilling the frame for mounting but really reduces the handling of the nasty stuff.
__________________
Scot
2014 Ram 1500 Laramie
2014 Raptor 27FS
2016 Polaris RZR S900
|
|
|
06-07-2013, 05:39 AM
|
#31
|
Senior Member
Join Date: Sep 2012
Location: Airdrie, Alberta
Posts: 552
|
Thank you all for sharing all this info!
Last night I changed out my 4" drainage PVC for 5" square vinyl fence post and with a tiny bit of trimming on 4 edges even the connectors fit inside. I will hinge the other side and add the tray (gutter) next week.
First I have to install my battery disconnect switch so I can put flat aluminum bar around my 2nd battery with a padlock so no one walks away with it in the storage lot.
__________________
2013 Passport 3220BHWE, upgrade axles, Kumho Radial 857's, all LED, TST507 TPMS, Reese DCSC, DIY corner stabilizers
2012 Ram 1500 Sport crew cab, Hemi, 4x4, 3.92 LSD, factory brake controller, S&B CAI w/scoop, Moroso air/oil can, 87mm ported/polished/knife-edged throttle body, Magnaflow exhaust, 180* t-stat, Rear lowered 2", Airlift 1000.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|