|
07-27-2012, 04:00 PM
|
#1
|
Junior Member
Join Date: Jun 2012
Location: North Carolina
Posts: 2
|
New member from NC - water heater problem
Hello everyone! Ken and Lecia semi retired and lovin it. This is our third enclosed unit and we love it. We own a 2009 Keystone Outback Sydney edition 321 FRL. I do have a problem I hope someone can answer. Our water heater is dual power; propane or electric. We bought it used and the first time we used it, we used both modes. Yes, the electric switch was used when it had water in the heater. Second time out, the lighted electric switch would not burn and no heated water! No problem with circuit breaker, so I assumed it was the heating element. Out comes the ohmmeter and I discover that it is not the problem either! Hmmmm. I checked the GFCI stuff and its OK, so I have narrowed down the problem to the switch itself when I discover there is no power coming to the electrical switch! Is the thermostat bad? Yes, the switch outside at the heating unit is in the "on" position. Now I am stumped. Dont know what to look for next. Anyone ever have the same problem? Anybody got an idea what I should check next??? Many thanks, Ghostrider06
|
|
|
07-27-2012, 04:54 PM
|
#2
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Quote:
Originally Posted by ghostrider06
Hello everyone! Ken and Lecia semi retired and lovin it. This is our third enclosed unit and we love it. We own a 2009 Keystone Outback Sydney edition 321 FRL. I do have a problem I hope someone can answer. Our water heater is dual power; propane or electric. We bought it used and the first time we used it, we used both modes. Yes, the electric switch was used when it had water in the heater. Second time out, the lighted electric switch would not burn and no heated water! No problem with circuit breaker, so I assumed it was the heating element. Out comes the ohmmeter and I discover that it is not the problem either! Hmmmm. I checked the GFCI stuff and its OK, so I have narrowed down the problem to the switch itself when I discover there is no power coming to the electrical switch! Is the thermostat bad? Yes, the switch outside at the heating unit is in the "on" position. Now I am stumped. Dont know what to look for next. Anyone ever have the same problem? Anybody got an idea what I should check next??? Many thanks, Ghostrider06
|
First I would check to see if I was getting power to the element. (Each screw to ground) When you checked the element with the ohm meter with the wires removed you should have had about 13ohms + or - 1 or 2. If you have no power start back at the breaker and check for loose wires. Keep trying you will find the problem. Meanwhile I assume it still works on gas ... if so I think you can rule out the thermostat. Good luck and keep us posted, Hank
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
07-27-2012, 06:49 PM
|
#3
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
Ghostrider06, Welcome to the forums.... Now, to hopefully head you to a fix...
Have you reset the water heater? There are two black rubbercoated buttons in the upper left part of the outside door part of the heater.... Push on them and see if it helps... You probably won't feel a click or snap when pushing them, but hopefully that'll reset your heater and start things getting you in "hot water" again
Hope this helps
John
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
07-28-2012, 08:08 AM
|
#4
|
Site Team
Join Date: Jun 2009
Location: Venice
Posts: 5,346
|
Now I know I'm getting old ....... how could I forget the reset button.
__________________
Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|
|
|
07-28-2012, 04:42 PM
|
#5
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,997
|
No comment Hank (other than I was in one of my "non-forgetful" cycles) LOL
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
07-28-2012, 05:31 PM
|
#6
|
Junior Member
Join Date: Jun 2012
Location: North Carolina
Posts: 2
|
Electrical feed to hot water heater
Hi Hank and thanks for the quick reply. Yes, I did press the reset buttons (at the same time). That didnt work. Guess there is a GFI somewhere hidden away. I will post when I find the answer. Many thanks, Ken
|
|
|
07-28-2012, 05:48 PM
|
#7
|
Senior Member
Join Date: Aug 2010
Location: Dacula, GA
Posts: 620
|
Hot water issue
Welcome to the forum. We had a similar issue this past winter in AZ. After a pro electrician poked and prodded around the control panel and reset, our electric kicked in and worked for 2 weeks and QUIT. Propane always worked. Our issue turned out to be a bad wire on the heater and was replaced with all in good working order for the past 4 months. We originally thought it was going to be the control panel. Wrong. Quirky little things these water heaters.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|