Those are for the cable actuated slides, manual override. The motor and gearbox are located in the center, on the wall just above the slide. Access by taking either the center trim piece off or the whole upper facia. Square end goes into the gearbox and other end is hex drive.
You only need one, but factory puts one for each motor, you have 3 so 3 tools.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|