Slide Out Issue.. Please Help

[koup]

We have a 2014 3010RE with three slides. On our most recent trip we were flagged down by a guy who let us know that he observed our left side slide out tip out as we were entering the freeway from the on ramp. This on ramp was a gradual right hand loop to enter the freeway. After I stopped I made certain all slides were tightly closed by using the slide switch. My system is a Lippert Hydraulic. I also have the 6 point leveling system. No more issues were observed until we started for home taking another right turn loop on ramp and I looked in my mirror as I completed the loop and I noticed the slide had again tipped out from the top. The bottom of the slide stayed tight to the coach but the top tipped out then tipped back in place after completing the turn. I stopped and made certain the sides were closed by again pressing the slide switch. No further issues were noted but we haven't made a right looping turn. 1. Is there an adjustment than can be made to the slide for a tipping issue?
2. Has anyone experienced this issue?
3. Thoughts?

[chuckster57]

There is an adjustment for the height of the bottom outside edge. Changing it will make the slide "lean" out or in as it retracts. Its possible that yours is leaning back as it retracts and when closed, there isn't any "pressure" on the top edge to keep it tight against the trailer wall.

This is just a guess, based on my experiences in adjusting slides. I wouldn't recommend doing any adjustments without having it looked at by a technician with some knowledge of slide mechanisms.