Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 05-22-2020, 09:46 PM   #1
B_Stew
Junior Member
 
Join Date: May 2020
Location: Broomfield
Posts: 3
Holding Tank Sensors

Hi! My grey tank sensors are always reading empty when I know they’re not (surprisingly the black tank sensors work!). I suspect I need to replace the sensors on the grey tank, but where are the holding tanks located, and how do I get to them? I have a 2015 Keystone Bullet 272BHS.
__________________

B_Stew is offline   Reply With Quote
Old 05-23-2020, 04:43 AM   #2
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 11,099
Welcome to the forum! If your trailer is still under factory warranty, I would have your selling dealership fix it. You probably just lost the ground on the sensor pack. You’ll have to remove as much coroplast as needed to access them. They will be located on the side of the tank and the white wire is the ground. The coroplast May held in place with rivers and you can remove them, and replace with self tapping screws/washers.
__________________

chuckster57 is offline   Reply With Quote
Old 05-23-2020, 06:58 AM   #3
travelin texans
Senior Member
 
travelin texans's Avatar
 
Join Date: Nov 2017
Location: Picacho Peak Rv Resort
Posts: 3,171
Honestly I wouldn't go to effort to drop the underbelly to fix something that won't work again after a couple fills.
We've had 7-8 RVs & to date haven't had one that the sensors weren't useless.
__________________
Danny & Linda
Former '13 Redwood FB owner
Currently rvless!
travelin texans is offline   Reply With Quote
Old 05-23-2020, 08:18 AM   #4
B_Stew
Junior Member
 
Join Date: May 2020
Location: Broomfield
Posts: 3
Thank you for that. I’m thinking I agree with you. May not be worth the trouble and my fresh and black water tank sensors work just fine, at least for now.
B_Stew is offline   Reply With Quote
Old 05-23-2020, 08:20 AM   #5
B_Stew
Junior Member
 
Join Date: May 2020
Location: Broomfield
Posts: 3
Thanks Chuckster57. I was hoping there was easy access to the tanks without taking off the underbelly. I think I’ll just let this one ride as is.
B_Stew is offline   Reply With Quote
Old 05-23-2020, 08:29 AM   #6
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 11,099
Quote:
Originally Posted by B_Stew View Post
Thanks Chuckster57. I was hoping there was easy access to the tanks without taking off the underbelly. I think I’ll just let this one ride as is.
Your welcome. You don't need to remove the whole underbelly. just enough screws/rivets to get access, but its entirely your choice. We don't have a choice on a new unit, they all have to work when we deliver the unit.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Old 05-23-2020, 09:22 AM   #7
Roscommon48
Senior Member
 
Join Date: Dec 2018
Location: grand rapids
Posts: 472
replace? really? the rule of thumb in rving is that your sensors will quit on you.


learn when it is time to dump....sensors won't help.
__________________

Roscommon48 is offline   Reply With Quote
Reply

Tags
tank

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
×