Sewer hose storage tube

[LM3929]

Originally Posted by Andymon

I bought a 5" PVC fence post, 8 feet long. Two end caps. An 8 foot PVC gutter that slides right in. Riveted hinges and clasps on the end caps and then mounted it under the trailer as close to the drain out as I could.
http://www.keystonerv.org/forums/att...0&d=1363369701

Does anyone have a part number for the gutter? all the PVC gutters I have seen are the one sided units.

I have the 5" Fence post now I would like to get that style of tray.

Lorne M.

[tileman]

Originally Posted by LM3929

Does anyone have a part number for the gutter? all the PVC gutters I have seen are the one sided units.

I have the 5" Fence post now I would like to get that style of tray.

Lorne M.

Would this work? http://www.lowes.com/pd_12066-322-RW...ter&facetInfo=

[JRTJH]

The gutter in the link above is what I used, but the end caps that Lowes sells with it (shown on the same weblink) will not fit into the fence post. They are about 3/4" too wide. The only way I could figure out to close the ends was with a piece of 3.4" fir cut to fit inside the gutter and 2 small wood screws on each side. Don't put screws on the bottom as they will cut into the fence post interior every time you slide the drawer out and shorten the life of the plastic.