Quote:
Originally Posted by Nivluv
Hello, I took my Key TV control module off to see what colors my coax cables were so I can add a diplexer to TV2 for Secondary Satellite and noticed the FM coax connector did not have anything connected to it. My radio works fine inside my rig, Does anybody know what is supposed to connect to the FM coax port on the Key TV and how am I able to get great reception with nothing plug into it
|
Check out a post I made a couple of months ago
here.
I was having a problem getting the scan to find any channels on my primary TV and when I pulled the module out I also observed the same thing as you.
When I pulled the wall jack for the TV and also pulled the Radio/DVD out, I found that the purple cable was running to the wall plate for the TV and that tan cable (which should have gone to the TV) was connected to the back of the Radio/DVD. The two devices were close enough that I was able to flip the cables. I still have nothing in the Key TV module's 'purple FM' port, but everything works now, including the TV.
In summary, as long as your TV's work (scan and find with cable and OTA), I don't think you have anything to worry about - my FM port was empty before and after and radio/DVD work fine both ways.